Test 2018-01-12-5-4 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 99999
DEA: 0322222
DIST-CO-RTE-PM03-SAC,OMG-888,99,80-0.6-0.6
Work DescriptionTHIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location DescriptionTHIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Sample Information
Sample Taken Date1/12/2018 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing1/12/2018
Sample typeVerification A brief description of the sampleCombined, Untreated, 3/4-inch Type A
The quantity of what the sample constitutesJMF From where was the sample collectedManufacturer
First name of sampler or witnessed bya Last name of sampler or witnessed bya
Title of samplerUnknown Laboratory sample identificationUnknown
The fabricator/manufacturer/facility nameSNC - Mustang Asphalt Plant Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)MSHA IDs 2602089 and 2602404
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sample5202
The plant numberUnknown A detailed description of where the material sample was collectedLab-batched from untreated stockpiles
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberNot set
Sublot numberNot set JMF Verification ID JMF3513-2018-7
Test Details
DIME Sample ID: 2018-01-12-5
DIME Test ID: 2018-01-12-5-4
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2018-01-24
Test Results

Input Type: Measured
Tester's full name: Ward Jenkins
Date of test: 01/17/2018
Mass of saturated surface dry sample (before pycnometer) (S): 500.2 grams
Mass of the pycnometer with water and aggregate (C): 977.4 grams
Mass of the pycnometer with water (B): 661.9 grams
Mass of the oven dried sample (before pycnometer) (A): 490 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500.2 grams
Mass of the oven dry aggregate (for absorption) (A): 490 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.653
Bulk specific gravity (SSD Basis):2.708
Apparent specific gravity:2.808
Absorption:2.1 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 01/17/2018