Owner Lab
- CT D02 - North Region Materials Lab
DIME Sample ID 2018-01-12-5
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 99999
DEA: 0322222 |
|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
|---|
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
|---|
| QA Service Level | (Verified on 04/05/2013) |
|---|
Sample Information
| Sample Taken Date | 01/12/2018 |
Sample Unique Key | 5 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 01/12/2018 |
|---|
| Sample type | Verification |
A brief description of the sample | Combined, Untreated, 3/4-inch Type A |
|---|
| The quantity of what the sample constitutes | JMF |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | a |
Last name of sampler or witnessed by | a |
|---|
| Title of sampler | Unknown |
Telephone number of sampler | Unknown |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | SNC - Mustang Asphalt Plant |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | MSHA IDs 2602089 and 2602404 |
|---|
| The fabricator's/manufacturer's product name for the sample | Unknown |
The fabricator/manufacturer designation for the sample | 5202 |
|---|
| The plant number | Unknown |
A detailed description of where the material sample was collected | Lab-batched from untreated stockpiles |
|---|
| Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
|---|
| The concrete mix design number | Unknown |
Lot number | Not set |
|---|
| Sublot number | Not set |
JMF Verification ID | JMF3513-2018-7 |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2018-01-12-5-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-2 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-5 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-7 | AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 01/24/2018 | |
|
| 2018-01-12-5-9 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Ward Jenkins | CT D02 - North Region Materials Lab | 01/17/2018 | Ward Jenkins | Yes | 03/22/2018 | Why is 2 percent of the sample not flat and elongated and not not flat and elongated question mark |
|
400834008440085400864008740088400894009040091
