DIME - Test Summary

Summary for Test 2020-10-28-4-3

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213707 DEA: 081C38U4 EFIS: 0817000196
DIST-CO-RTE-PM	08-RIV-10-6.7/R25.1
Award Date	11/26/2019
Closeout Date	11/01/2023
Work Description	Remove concrete pavement and base, and place HMA and JPCP
Location Description	ROUTE 10/60 SEPARATION IN BEAUMONT TO ROUTE 10/111 SEPARATION NEAR CABAZON.
QA Service Level	1 (Verified on 01/09/2020)

Sample Taken Date	10/28/2020	Sample Unique Key	4
Date that the sample was received by the laboratory/organization performing the testing	10/29/2020	Sample type	Verification
A brief description of the sample	PSUE 3/4" HMA-A-SP R24 0.5% LAS	The quantity of what the sample constitutes	4 Bags Of Agg., 1 Bag Of Rap
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Fattah
Last name of sampler or witnessed by	Kazi	Title of sampler
Telephone number of sampler		Laboratory sample identification	0640A-20
Linked DIME Sample ID		The fabricator/manufacturer/facility name	California Commercial Asphalt - Lake Elsinore
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0098, 91-33-0011
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R24	The fabricator/manufacturer designation for the sample
The plant number	53417615	A detailed description of where the material sample was collected	Belt Cut at California Commercial Asphalt Lake Elsinore Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-10-28-4

DIME Test ID: 2020-10-28-4-3

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-11-16

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 11/10/2020

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	969.3 grams
Mass of the pycnometer with water (B)	655.8 grams
Mass of the oven dried sample (before pycnometer) (A)	497.4 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	497.4 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.667
Bulk specific gravity (SSD Basis)	2.681
Apparent specific gravity	2.705
Absorption	0.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 11/16/2020 ✔