DIME - Test Summary

Summary for Test 2020-08-08-4-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 7613 DEA: 071218W4 EFIS: 0700021119
DIST-CO-RTE-PM	07-LA-5-29.4/31.6
Award Date	11/29/2012
Closeout Date	07/31/2023
Work Description	REALIGN ROUTE 5 AND RAILROAD TRACKS AND RECONFIGURE ON- AND OFF-RAMPS.
Location Description	LOS ANGELES COUNTY IN BURBANK FROM WEST MAGNOLIA BOULEVARD OVERCROSSING TO 0.3 MILE NORTH OF BUENA VISTA STREET/WINONA AVENUE UNDERCROSSING
QA Service Level	1 (Verified on 10/08/2012)

Sample Taken Date	08/08/2020	Sample Unique Key	4
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/12/2020
Sample type	Verification	A brief description of the sample	JMF 1/2" RHMA-G-SP 0.5% LAS
The quantity of what the sample constitutes	6 Bags Of Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	MD	Last name of sampler or witnessed by	Shahjahan
Title of sampler		Telephone number of sampler
Laboratory sample identification	0492A-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials Sun Valley	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035::FISH CANYON QUARRY
The fabricator's/manufacturer's product name for the sample	1/2 RHMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	326120 SVA3 VLO	A detailed description of where the material sample was collected	Belt Cut at Vulcan Sun Valley Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-08-08-4

DIME Test ID: 2020-08-08-4-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2020-08-20

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 08/18/2020

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 970.3 grams

Mass of the pycnometer with water (B): 655.8 grams

Mass of the oven dried sample (before pycnometer) (A): 491.7 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 491.7 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.651

Bulk specific gravity (SSD Basis): 2.695

Apparent specific gravity: 2.775

Absorption: 1.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/20/2020 ✔