Summary for Test 2020-07-08-1-1
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 213970 DEA: 080K1214 EFIS: 0815000245 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-12.5/14.8 |
| Award Date | 12/23/2019 |
| Closeout Date | 01/18/2022 |
| Work Description | REPLACE PCC PAVEMENT WITH JPCP AND PRECAST JOINTED CONCRETE PAVEMENT. |
| Location Description | SAN BERNARDINO COUNTY IN FONTANA AND NEAR DEVORE FROM 0.3 MILE SOUTH OF SIERRA AVENUE UNDERCROSSING TO GLEN HELEN PARKWAY UNDERCROSSING |
| QA Service Level | 1 (Verified on 12/12/2019) |
Sample Information
| Sample Taken Date | 07/08/2020 | Sample Unique Key | 1 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/13/2020 | Sample type | Quality Assurance |
| A brief description of the sample | 3/4"-10 all thread rod with nut and plate washer | The quantity of what the sample constitutes | 130 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Steve |
| Last name of sampler or witnessed by | Hall | Title of sampler | CT METS QA INSPECTOR |
| Telephone number of sampler | 6466327821 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Cordova Bolt | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | 134-142-20 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | All Thread 10624770 Nuts DL19102901 Plate washers 1202011437 | Nut Mfg. Lot Number(s) | 431189A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | ASTM A449 type 1 |
| Bolt Length(s) | approx. 48" | Nut Specification | A563-15 |
| Washer Specification | ASTM A36/A529 Gr 50/44W/50W | Finish | HDG |
| Diameter/Size | 3/4" | Bolt Mfg. Lot Number | |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-07-08-1
DIME Test ID: 2020-07-08-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2020-07-22
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: fsaylor
Date of test: 07/21/2020
UTM: 400kip
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | UNC 3/4 | 0.334 | 44336 | 197 | 132742 | 121858 | 40701 | A449 All threaded Rod |
General comments (publicly viewable) (Max 1000 characters): A449 All threaded Rod
Test Graph
Source: Bluehill Data Point FileTest was verified on 7/22/2020 ✔