Summary for Test 2020-04-03-17-6
Test performed: AASHTO T283-14Project Information
Project Identifiers | Project ID: 214516 DEA: 024H2404 EFIS: 0218000098 |
---|---|
DIST-CO-RTE-PM | 02-TRI-3-32.0/38.0,53.7/63.8 |
Award Date | 12/23/2019 |
Closeout Date | 02/18/2021 |
Work Description | PLACE HMA (TYPE A) OVERLAY, SHOULDER BACKING, AND TRAFFIC STRIPE. |
Location Description | TRINITY COUNTY NEAR WEAVERVILLE FROM 0.4 MILE NORTH OF BROWNS RANCH ROAD TO 0.1 MILE NORTH OF RUSH CREEK ROAD AND FROM EAST FORK STUART BRIDGE TO 2.4 MILES NORTH OF EL DORADO WAY |
QA Service Level | 1 (Verified on 01/22/2020) |
Sample Information
Sample Taken Date | 04/03/2020 | Sample Unique Key | 17 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/03/2020 |
Sample type | Verification | A brief description of the sample | 3/8-inch Type A HMA (eq. PG 64-28 M) with 24.0 RAP, 1.2 Lime |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78370 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Tullis Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 853453 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/8 inch | Lot number | Unknown |
Sublot number | Unknown | HMA Mix Number | Not set |
Test Details
DIME Sample ID: 2020-04-03-17
DIME Test ID: 2020-04-03-17-6
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Test Release Date: 2020-05-15
Test Results
Unit system used?: SI Units
Input Type: Measured
Tester's full name: Ward Jenkins
Date of test: 04/14/2020
Wet 1 | Wet 2 | Wet 3 | Dry 1 | Dry 2 | Dry 3 | |
---|---|---|---|---|---|---|
150 mm | 150 mm | 150 mm | 150 mm | 150 mm | 150 mm | |
94.9 mm | 94.9 mm | 94.9 mm | 95 mm | 94.9 mm | 94.9 mm | |
3735.6 g | 3737 g | 3737.1 g | 3736.4 g | 3737.4 g | 3737.1 g | |
2122.4 g | 2127.7 g | 2125.5 g | 2125.8 g | 2129.4 g | 2129.8 g | |
3751 g | 3755.7 g | 3755 g | 3756.8 g | 3758.6 g | 3756.8 g | |
2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | |
3819.4 g | 3823.4 g | 3816.8 g | ||||
2190.3 g | 2194.4 g | 2185.1 g | ||||
94.9 mm | 94.9 mm | 94.9 mm | ||||
154 mmHg | 155 mmHg | 155 mmHg | ||||
23 inHg | 23 inHg | 23 inHg | ||||
5 minutes | 5 minutes | 5 minutes | ||||
1628.6 cm^3 | 1628 cm^3 | 1629.5 cm^3 | 1631 cm^3 | 1629.2 cm^3 | 1627 cm^3 | |
2.294 | 2.295 | 2.293 | 2.291 | 2.294 | 2.297 | |
6.7 % | 6.7 % | 6.8 % | 6.9 % | 6.7 % | 6.6 % | |
109.1 cm^3 | 109.1 cm^3 | 110.8 cm^3 | 112.5 cm^3 | 109.2 cm^3 | 107.4 cm^3 | |
3812 g | 3813.4 g | 3814.7 g | ||||
3822.9 g | 3824.3 g | 3825.7 g | ||||
1629.1 cm^3 | 1629 cm^3 | 1631.7 cm^3 | ||||
83.8 cm^3 | 86.4 cm^3 | 79.7 cm^3 | ||||
77 % | 79 % | 72 % | ||||
0 % | 0.1 % | 0.1 % | ||||
28224 N | 28424 N | 29140 N | 29714 N | 29848 N | 30061 N | |
0 | 0 | 0 | 0 | 0 | 0 | |
38 | 42 | 37 | 52 | 53 | 46 | |
0 | 0 | 0 | 0 | 0 | 0 | |
1262 kPa | 1271 kPa | 1303 kPa | 1327 kPa | 1335 kPa | 1344 kPa | |
185 psi | 194 psi | |||||
0.95 |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/15/2020 ✔