DIME - Sample Record for DIME Sample ID 2020-04-03-17

DIME » All Projects » Project - DEA: 024H2404 » Sample 2020-04-03-17 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-04-03-17

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214516 DEA: 024H2404 EFIS: 0218000098
DIST-CO-RTE-PM	02-TRI-3-32.0/38.0,53.7/63.8
Award Date	12/23/2019
Closeout Date	02/18/2021
Work Description	PLACE HMA (TYPE A) OVERLAY, SHOULDER BACKING, AND TRAFFIC STRIPE.
Location Description	TRINITY COUNTY NEAR WEAVERVILLE FROM 0.4 MILE NORTH OF BROWNS RANCH ROAD TO 0.1 MILE NORTH OF RUSH CREEK ROAD AND FROM EAST FORK STUART BRIDGE TO 2.4 MILES NORTH OF EL DORADO WAY
QA Service Level	1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date	04/03/2020	Sample Unique Key	17
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/03/2020
Sample type	Verification	A brief description of the sample	3/8-inch Type A HMA (eq. PG 64-28 M) with 24.0 RAP, 1.2 Lime
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Cindy	Last name of sampler or witnessed by	Bryant
Title of sampler		Telephone number of sampler
Laboratory sample identification	D78370	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Tullis Inc - Northstate Asphalt - Redding, CA	Transportation Laboratory (TL) Number	853453
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	3/8 inch	Lot number	Unknown
Sublot number	Unknown	HMA Mix Number	Not set

JMF Information

Verification ID	JMF3513-2020-118	Date Created	05/01/2020
JMF Submittal ID	JMF3511-22-2020-195	JMF Status	Submittal Rejected For Use
Producer Mix ID	L200135	Rejected Date	05/18/2020

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-04-03-17-1	THIS TEST HAS BEEN SUPERSEDED. AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	05/06/2020	Ward Jenkins	Yes	05/15/2020	THIS TEST HAS BEEN SUPERSEDED.
2020-04-03-17-2	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	04/06/2020	Ward Jenkins	Yes	05/15/2020
2020-04-03-17-3	AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	04/06/2020	Ward Jenkins	Yes	05/15/2020
2020-04-03-17-4	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	04/07/2020	Ward Jenkins	Yes	05/15/2020
2020-04-03-17-5	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	04/07/2020	Ward Jenkins	Yes	05/15/2020
2020-04-03-17-6	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Ward Jenkins, CT D02 - Redding Northern Regional Laboratory	04/14/2020	Ward Jenkins	Yes	05/15/2020
2020-04-03-17-7	AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	04/08/2020	Ward Jenkins	Yes	05/15/2020
2020-04-03-17-8	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	05/09/2020	Ward Jenkins	Yes	07/02/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-04-03-17-1 AASHTO T308-10 (Verified)
DIME Test ID: 2020-04-03-17-2 AASHTO T209-12 (Verified)
DIME Test ID: 2020-04-03-17-3 AASHTO T312-14 (Verified)
DIME Test ID: 2020-04-03-17-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2020-04-03-17-5 AASHTO T269-14 (Verified)
DIME Test ID: 2020-04-03-17-6 AASHTO T283-14 (Verified)
DIME Test ID: 2020-04-03-17-7 AASHTO T324-14 (Verified)
DIME Test ID: 2020-04-03-17-8 AASHTO T308-10 (Verified)