Summary for Test 2020-04-03-17-1
Test performed: AASHTO T308-10
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Project Information
| Project Identifiers | Project ID: 214516 DEA: 024H2404 EFIS: 0218000098 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-3-32.0/38.0,53.7/63.8 |
| Award Date | 12/23/2019 |
| Closeout Date | 02/18/2021 |
| Work Description | PLACE HMA (TYPE A) OVERLAY, SHOULDER BACKING, AND TRAFFIC STRIPE. |
| Location Description | TRINITY COUNTY NEAR WEAVERVILLE FROM 0.4 MILE NORTH OF BROWNS RANCH ROAD TO 0.1 MILE NORTH OF RUSH CREEK ROAD AND FROM EAST FORK STUART BRIDGE TO 2.4 MILES NORTH OF EL DORADO WAY |
| QA Service Level | 1 (Verified on 01/22/2020) |
Sample Information
| Sample Taken Date | 04/03/2020 | Sample Unique Key | 17 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/03/2020 |
| Sample type | Verification | A brief description of the sample | 3/8-inch Type A HMA (eq. PG 64-28 M) with 24.0 RAP, 1.2 Lime |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D78370 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Tullis Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 853453 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/8 inch | Lot number | Unknown |
| Sublot number | Unknown | HMA Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-04-03-17
DIME Test ID: 2020-04-03-17-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2020-05-15
Test Results
What temperature unit is used?: Fahrenheit
Input Type: Calculated
Tester's full name: Colt Sweeny
Date of test: 05/06/2020
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 1403.1 g
Mass Loss: no data
Correction Factor (Percent by mass of HMA Specimen): 0.52 %
Moisture Content: 0 %
Temperature Compensation Factor: no data
Test Temperature: 1000 F
Corrected Asphalt Binder Content: 6.39 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/15/2020 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.