Summary for Test 2020-04-15-1-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 214587 DEA: 101J1604 EFIS: 1018000180 |
|---|---|
| DIST-CO-RTE-PM | 10-STA-132-27.9/41.0 |
| Award Date | 03/02/2020 |
| Closeout Date | 04/26/2021 |
| Work Description | COLD PLANE AC PAVEMENT, RHMA OVERLAY AND SLURRY SEAL. |
| Location Description | STANISLAUS COUNTY IN AND NEAR WATERFORD FROM G STREET TO 1.2 MILES EAST OF RUSHING ROAD |
| QA Service Level | 1 (Verified on 01/24/2020) |
Sample Information
| Sample Taken Date | 04/15/2020 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/15/2020 |
| Sample type | Verification | A brief description of the sample | Type A HMA with RAP |
| The quantity of what the sample constitutes | 16 boxes of 1/2" Type A HMA with RAP | From where was the sample collected | Source |
| First name of sampler or witnessed by | J | Last name of sampler or witnessed by | Kort |
| Title of sampler | Technician | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | George Reed Inc | Transportation Laboratory (TL) Number | C033878 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | Unknown |
| Sublot number | Unknown | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-04-15-1
DIME Test ID: 2020-04-15-1-1
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2020-04-22
Test Results
What temperature unit is used?: Fahrenheit
Input Type: Calculated
Tester's full name: Frank Chavez Jr
Date of test: 04/17/2020
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 1526.7 g
Mass Loss: no data
Correction Factor (Percent by mass of HMA Specimen): 0.58 %
Moisture Content: 0.23 %
Temperature Compensation Factor: no data
Test Temperature: 538 F
Corrected Asphalt Binder Content: 5.23 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/22/2020 ✔