Owner Lab
- CT HQ - Hot Mix Asphalt Laboratory
DIME Sample ID 2020-04-15-1
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214587
DEA: 101J1604
EFIS: 1018000180 |
|---|
| DIST-CO-RTE-PM | 10-STA-132-27.9/41.0 |
|---|
| Award Date | 03/02/2020 |
|---|
| Closeout Date | 04/26/2021 |
|---|
| Work Description | COLD PLANE AC PAVEMENT, RHMA OVERLAY AND SLURRY SEAL. |
|---|
| Location Description | STANISLAUS COUNTY IN AND NEAR WATERFORD FROM G STREET TO 1.2 MILES EAST OF RUSHING ROAD |
|---|
| QA Service Level | 1 (Verified on 01/24/2020) |
|---|
Sample Information
| Sample Taken Date | 04/15/2020 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 04/15/2020 |
|---|
| Sample type | Verification |
A brief description of the sample | Type A HMA with RAP |
|---|
| The quantity of what the sample constitutes | 16 boxes of 1/2" Type A HMA with RAP |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | J |
Last name of sampler or witnessed by | Kort |
|---|
| Title of sampler | Technician |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | George Reed Inc |
Transportation Laboratory (TL) Number | C033878 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Hot Mix Asphalt |
HMA Type | Type A HMA |
|---|
| HMA Grading | 1/2 inch |
Lot number | Unknown |
|---|
| Sublot number | Unknown |
JMF Verification ID | JMF3513-2020-108 |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2020-04-15-1-1 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content) | Frank Chavez Jr | CT HQ - Hot Mix Asphalt Laboratory | 04/17/2020 | Frank Chavez Jr | Yes | 04/22/2020 | |
|
| 2020-04-15-1-2 | AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content) | Frank Chavez Jr | CT HQ - Hot Mix Asphalt Laboratory | 04/17/2020 | Frank Chavez Jr | Yes | 04/22/2020 | |
|
| 2020-04-15-1-3 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Frank Chavez Jr | CT HQ - Hot Mix Asphalt Laboratory | 04/17/2020 | Frank Chavez Jr | Yes | 04/20/2020 | |
|
| 2020-04-15-1-4 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Frank Chavez Jr | CT HQ - Hot Mix Asphalt Laboratory | 04/17/2020 | Frank Chavez Jr | Yes | 04/20/2020 | |
|
| 2020-04-15-1-5 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Frank Chavez Jr | CT HQ - Hot Mix Asphalt Laboratory | 04/17/2020 | Frank Chavez Jr | Yes | 04/20/2020 | |
|
| 2020-04-15-1-6 | AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content) | Frank Chavez Jr | CT HQ - Hot Mix Asphalt Laboratory | 04/17/2020 | Frank Chavez Jr | Yes | 04/23/2020 | |
|
| 2020-04-15-1-7 | AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track) | Frank Chavez Jr | CT HQ - Hot Mix Asphalt Laboratory | 04/17/2020 | Frank Chavez Jr | Yes | 04/23/2020 | |
|
80597805918040080401804028072380720
