Summary for Test 2020-02-26-3-10
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 213707 DEA: 081C38U4 EFIS: 0817000196 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-10-6.7/R25.1 |
| Award Date | 11/26/2019 |
| Closeout Date | 11/01/2023 |
| Work Description | Remove concrete pavement and base, and place HMA and JPCP |
| Location Description | ROUTE 10/60 SEPARATION IN BEAUMONT TO ROUTE 10/111 SEPARATION NEAR CABAZON. |
| QA Service Level | 1 (Verified on 01/09/2020) |
Sample Information
| Sample Taken Date | 02/26/2020 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 02/27/2020 | Sample type | Verification |
| A brief description of the sample | 3/4 HMA-A-SP R24 Aggreagte and Rap | The quantity of what the sample constitutes | PSUE 6 Bags |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Eric |
| Last name of sampler or witnessed by | California Commercial Asphalt | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 0150A-20 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | California Commercial Asphalt - Coachella | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0084 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R24 | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 43417615 | A detailed description of where the material sample was collected | Belt Cut at California Commercial Asphalt Coachella Plant |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-02-26-3
DIME Test ID: 2020-02-26-3-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-03-17
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Edmond Jabbour, Larry Diaz
Date of test: 02/28/2020
| Sieve Size | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 98 % | ||||||
| 83 % | ||||||
| 73 % | ||||||
| 46 % | ||||||
| 37 % | ||||||
| 27 % | ||||||
| 20 % | ||||||
| 13 % | ||||||
| 7 % | ||||||
| 4.1 % | ||||||
General comments (publicly viewable) (Max 1000 characters): Combined RAP/Virgin Aggregate w/Correlation Factors Applied
Test was verified on 3/17/2020 ✔