Summary for Test 2017-04-03-9-5
Test performed: ASTM D4791-10Project Information
| Project Identifiers | Project ID: 213793 DEA: 060W7004 EFIS: 0617000283 |
|---|---|
| DIST-CO-RTE-PM | 06-FRE-33-24.3/R29.0,R39.9/44.5 |
| Award Date | 01/24/2019 |
| Closeout Date | 08/20/2021 |
| Work Description | COLD PLANE AC PAVEMENT, PLACE HMA RESURFACING. |
| Location Description | FRESNO COUNTY ABOUT 7.8 MILES NORTH OF COALINGA FROM NORTH JUNCTION ROUTE 198 TO SOUTH JUNCTION ROUTE 33/5 AND FROM 0.1 MILE NORTH OF NORTH JUNCTION ROUTE 33/5 TO EL PROGRESSIO ROAD |
| QA Service Level | 1 (Verified on 01/09/2019) |
Sample Information
| Sample Taken Date | 04/03/2017 | Sample Unique Key | 9 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/03/2017 | Sample type | Quality Control |
| A brief description of the sample | Combined 1/2 inch Type A untreated (Dispute Resolution) | The quantity of what the sample constitutes | JMF HMA Design Data (Dispute Resolution) |
| From where was the sample collected | Source | First name of sampler or witnessed by | SPM |
| Last name of sampler or witnessed by | Avenal | Title of sampler | NA |
| Telephone number of sampler | 805-473-3016 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | SPM-Avenal | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-10-0006::AVENAL AGGREGATES |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | SPM-Avenal | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-04-03-9
DIME Test ID: 2017-04-03-9-5
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Test Release Date: 2019-05-08
Test Results
Method A - Percentage of Flat Particles, Elongated Particles, and Flat & Elongated Particles
Method B - Flat & Elongated Particles
Method: A
Determination: By Mass
Dimensional ratio used: 1:5
Input Type: Calculated
Tester's full name: G3 Quality, Inc.
Date of test: 04/03/2017
Weighted percentage of particles (by mass) that were flat: 0 %
Weighted percentage of particles (by mass) that were elongated: 0 %
Weighted percentage of particles (by mass) that were both flat and elongated: 0 %
Weighted percentage of particles (by mass) that were neither flat nor elongated: 0 %
General comments (publicly viewable) (Max 1000 characters): JMF Renewal Dispute Resolution - HQ is handling the dispute by performing a full JMF verifcation through the Aggregate and HMA Labs. JMF served Project ID: 0617000283.
Test was verified on 5/1/2019 ✔