Summary for Test 2019-04-16-4-1
Test performed: ASTM F606-14aProject Information
| Project Identifiers | Project ID: 211784 DEA: 11085784 EFIS: 1100000064 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-163-4.1/4.9 |
| Award Date | 06/16/2017 |
| Closeout Date | 08/10/2021 |
| Work Description | INTERCHANGE MODIFICATION AND OVERCROSSING WIDENING. |
| Location Description | SAN DIEGO COUNTY IN SAN DIEGO FROM 0.3 MILE SOUTH TO 0.5 MILE NORTH OF FRIARS ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 09/05/2017) |
Sample Information
| Sample Taken Date | 04/16/2019 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/16/2019 | Sample type | Quality Assurance |
| A brief description of the sample | A325 HDG Bolt | The quantity of what the sample constitutes | 5 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Lorenzo |
| Last name of sampler or witnessed by | Garcia | Title of sampler | QA |
| Telephone number of sampler | 702 917-2503 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Structural and Steel Products | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | L115-047-19 | |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 150419A |
|---|---|---|---|
| Heat Number(s) | DL15105381 - B40410 - DL16102391 | Nut Mfg. Lot Number(s) | 374243C |
| Washer Mfg. Lot Number(s) | D3217 | Bolt Specification | A325 |
| Bolt Length(s) | 3-1/2 | Nut Specification | A563 |
| Washer Specification | F436 M/G | Finish | Hot Dipped Galvanized |
| Diameter/Size | 7/8 | Bolt Mfg. Lot Number | 380980A |
| Rocap Test Requirement(s) | None | Lubricant Requirements(s) | With blue Dye |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-04-16-4
DIME Test ID: 2019-04-16-4-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2019-05-08
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: Steve
Date of test: 04/30/2019
UTM: 400KIP
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | 380980A | 7/8\" | 68337 | 304 | 10 | A325 | Steve |
General comments (publicly viewable) (Max 1000 characters): A325
Test Graph
Source: Partner Data Point FileTest was verified on 5/1/2019 ✔