Sample Record

Owner Lab

  • CT HQ - QASI Los Angeles Field Office

DIME Sample ID 2019-04-16-4

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211784
DEA: 11085784
EFIS: 1100000064
DIST-CO-RTE-PM11-SD-163-4.1/4.9
Award Date06/16/2017
Closeout Date08/10/2021
Work DescriptionINTERCHANGE MODIFICATION AND OVERCROSSING WIDENING.
Location DescriptionSAN DIEGO COUNTY IN SAN DIEGO FROM 0.3 MILE SOUTH TO 0.5 MILE NORTH OF FRIARS ROAD OVERCROSSING
QA Service Level1 (Verified on 09/05/2017)

Sample Information

Sample Taken Date04/16/2019 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/16/2019
Sample typeQuality Assurance A brief description of the sampleA325 HDG Bolt
The quantity of what the sample constitutes5 From where was the sample collectedFabricator
First name of sampler or witnessed byLorenzo Last name of sampler or witnessed byGarcia
Title of samplerQA Telephone number of sampler702 917-2503
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameStructural and Steel Products Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormL115-047-19 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)150419A
Heat Number(s)DL15105381 - B40410 - DL16102391 Nut Mfg. Lot Number(s)374243C
Washer Mfg. Lot Number(s)D3217 Bolt SpecificationA325
Bolt Length(s)3-1/2 Nut SpecificationA563
Washer SpecificationF436 M/G FinishHot Dipped Galvanized
Diameter/Size7/8 Bolt Mfg. Lot Number380980A
Rocap Test Requirement(s)None Lubricant Requirements(s)With blue Dye

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-04-16-4-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/30/2019Steve
Yes
05/08/2019A325
2019-04-16-4-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/30/2019Steve
Yes
05/08/2019A325
2019-04-16-4-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/30/2019Steve
Yes
05/08/2019A325
2019-04-16-4-4ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/30/2019Steve
Yes
05/08/2019Nut Proof Load
2019-04-16-4-5ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/30/2019Steve
Yes
05/08/2019Nut Proof Load
2019-04-16-4-6ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory04/30/2019Steve
Yes
05/08/2019Nut Proof Load
2019-04-16-4-7ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/01/2019Steven Paine
Yes
05/08/2019
2019-04-16-4-8ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/01/2019Steven Paine
Yes
05/08/2019
2019-04-16-4-9ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/01/2019Steven Paine
Yes
05/08/2019
2019-04-16-4-10ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory05/01/2019Steven Paine
Yes
05/08/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-04-16-4-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-4-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-4-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-4-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-4-5 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-4-6 ASTM F606-14a (Verified)
DIME Test ID: 2019-04-16-4-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-4-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-4-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-4-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-4-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-16-4-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-18 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-19 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-20 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-21 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-22 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-23 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-24 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-25 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-26 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-27 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-28 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-29 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-30 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-31 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-16-4-32 ASTM E18-15 (Verified)
DIME Test ID: 2019-04-16-4-33 ASTM E18-15 (Verified)
DIME Test ID: 2019-04-16-4-34 ASTM E18-15 (Verified)
DIME Test ID: 2019-04-16-4-35 ASTM E18-15 (Verified)