Summary for Test 2018-12-04-3-1
Test performed: CTM 673-July 2012Project Information
| Project Identifiers | DEA: No Project |
|---|---|
| DIST-CO-RTE-PM | --- |
| Award Date | Not set |
| Closeout Date | 11/01/2022 |
| Work Description | Special project identifier for material not associated with a project |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 12/04/2018 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/06/2018 | Sample type | Quality Assurance |
| A brief description of the sample | 3.75 elastomeric joint seal | The quantity of what the sample constitutes | 550ft |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | David |
| Last name of sampler or witnessed by | Simon | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Watson Bowman |
| Transportation Laboratory (TL) Number | Unknown | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 3618432 |
|---|---|---|---|
| Manufacturer(s) | Watson Bowman | Temperature | 72 |
| Humidity | 50 | Comments | Unknown |
| Joint Seal Size | 3.75 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-12-04-3
DIME Test ID: 2018-12-04-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-12-27
Test Results
Input Type: Measured
Tester's full name: Steve
Date of test: 12/10/2018
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 68.8927 lbs
Width at 4 x Load at W1: 1.56005 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.984 in
Measured Minimum Uncompressed Width: 3.9015 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.921 in
Height of Contact Face: 3.6445 in
Length: no data
Spec Minimum Uncompressed Width: 3.9015 in
Area (5 Times of the Height of Contact Face): 18.223 sqin
Half of the Spec Minimum Uncompressed Width: 1.9605 in
85 Percent of the Spec Minimum Uncompressed Width: 3.31627 in
3 Times of the Area: 54.669 sqin
4 Times of the Load at W1: 275.571 in
W1 (US Units): 3.316 in
W1 (Metric Units): 84.233 millimeters
W2 (US Units): 1.56 in
W2 (Metric Units): 39.625 millimeters
Satisfactory of MR of (US Units): 1.756 in
Satisfactory of MR of (Metric Units): 44.608 millimeters
Optional W1 Measurement 1: 3.3163 in
Optional W1 Measurement 2: 55.0335 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 12/20/2018 ✔