Summary for Test 2018-09-21-15-4
Test performed: AASHTO T304-11Project Information
| Project Identifiers | Project ID: 213182 DEA: 030C4724 EFIS: 0314000272 |
|---|---|
| DIST-CO-RTE-PM | 03-YOL-16-20.5/21.3, 28.2/31.8 |
| Award Date | 06/19/2018 |
| Closeout Date | 10/06/2021 |
| Work Description | ADD TURN LANES & ROUNDABOUT, ALIGN CURVE, WIDEN SHOULDER, CULVERT WORK |
| Location Description | YOLO COUNTY NEAR ESPARTO FROM 0.3 MILE WEST TO 0.4 MILE EAST OF COUNTY ROAD 79 AND FROM 0.1 MILE EAST OF PLAINFIELD STREET TO 0.1 MILE EAST OF COUNTY ROAD 90 |
| QA Service Level | 1 (Verified on 07/26/2018) |
Sample Information
| Sample Taken Date | 09/21/2018 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/24/2018 |
| Sample type | Verification | A brief description of the sample | Aggs for JMF |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Source |
| First name of sampler or witnessed by | Cameron | Last name of sampler or witnessed by | Richardson |
| Title of sampler | Manager Technical Services | Telephone number of sampler | Unknown |
| Laboratory sample identification | 03JMF18-031 | Linked DIME Sample ID | 2018-09-21-14 |
| The fabricator/manufacturer/facility name | Vulcan Materials - Madison | Transportation Laboratory (TL) Number | 783660 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | N/A | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-57-0008::SOLANO CONCRETE OFF-CHANNEL |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 RHMA TYPE G | The fabricator/manufacturer designation for the sample | 326120-MSRD |
| The plant number | NA | A detailed description of where the material sample was collected | Hot Bins |
| Where the material sample would have been placed if not sampled | Batch Drum | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | NA | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-09-21-15
DIME Test ID: 2018-09-21-15-4
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Test Release Date: 2018-10-15
Test Results
What test method is performed?: Method A
Input Type: Measured
Tester's full name: Jeff Herbert
Date of test: 10/08/2018
Mass of measure: 189.7 grams
Bulk dry specific gravity: 2.601
Mass of sample and measure #1: 328 grams
Mass of sample and measure #2: 327.8 grams
Volume of cylinder: 99.9 mL
Mass of sample #1: 138.3 grams
Mass of sample #2: 138.1 grams
Uncompacted voids #1: 46.8 %
Uncompacted voids #2: 46.9 %
Average uncompacted voids: 46.8 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/8/2018 ✔