Sample Record

Owner Lab

  • CT D03 - North Region Materials Lab

DIME Sample ID 2018-09-21-15

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213182
DEA: 030C4724
EFIS: 0314000272
DIST-CO-RTE-PM03-YOL-16-20.5/21.3, 28.2/31.8
Award Date06/19/2018
Closeout Date10/06/2021
Work DescriptionADD TURN LANES & ROUNDABOUT, ALIGN CURVE, WIDEN SHOULDER, CULVERT WORK
Location DescriptionYOLO COUNTY NEAR ESPARTO FROM 0.3 MILE WEST TO 0.4 MILE EAST OF COUNTY ROAD 79 AND FROM 0.1 MILE EAST OF PLAINFIELD STREET TO 0.1 MILE EAST OF COUNTY ROAD 90
QA Service Level1 (Verified on 07/26/2018)

Sample Information

Sample Taken Date09/21/2018 Sample Unique Key15
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/24/2018
Sample typeVerification A brief description of the sampleAggs for JMF
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byCameron Last name of sampler or witnessed byRichardson
Title of samplerManager Technical Services Telephone number of samplerUnknown
Laboratory sample identification03JMF18-031 Linked DIME Sample ID2018-09-21-14
The fabricator/manufacturer/facility nameVulcan Materials - Madison Transportation Laboratory (TL) Number783660
Inspector Lot Number from the Transportation Laboratory (TL) FormN/A Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-57-0008::SOLANO CONCRETE OFF-CHANNEL
The fabricator's/manufacturer's product name for the sample1/2 RHMA TYPE G The fabricator/manufacturer designation for the sample326120-MSRD
The plant numberNA A detailed description of where the material sample was collectedHot Bins
Where the material sample would have been placed if not sampledBatch Drum Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberNA Lot numberNot set
Sublot numberNot set JMF Verification ID
HMA PayNo

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-09-21-15-1AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by WashingJeff HerbertCT D03 - North Region Materials Lab10/08/2018Jeff Herbert
Yes
10/15/2018
2018-09-21-15-2AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Jeff HerbertCT D03 - North Region Materials Lab10/08/2018Jeff Herbert
Yes
10/15/2018
2018-09-21-15-3AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Jeff HerbertCT D03 - North Region Materials Lab10/08/2018Jeff Herbert
Yes
10/15/2018
2018-09-21-15-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Jeff HerbertCT D03 - North Region Materials Lab10/08/2018Jeff Herbert
Yes
10/15/2018
2018-09-21-15-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Jeff HerbertCT D03 - North Region Materials Lab10/08/2018Jeff Herbert
Yes
10/15/2018
2018-09-21-15-6AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Jeff HerbertCT D03 - North Region Materials Lab10/08/2018Jeff Herbert
Yes
10/15/2018
2018-09-21-15-7AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Jeff HerbertCT D03 - North Region Materials Lab10/08/2018Jeff Herbert
Yes
10/15/2018