Summary for Test 2018-09-26-4-2
Test performed: ASTM F606-14Project Information
| Project Identifiers | DEA: No Project |
|---|---|
| DIST-CO-RTE-PM | --- |
| Award Date | Not set |
| Closeout Date | 11/01/2022 |
| Work Description | Special project identifier for material not associated with a project |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 09/26/2018 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/03/2018 | Sample type | Quality Assurance |
| A brief description of the sample | F1554 Grade 55 HDG Anchor Bolts | The quantity of what the sample constitutes | 8 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | William |
| Last name of sampler or witnessed by | Clifford | Title of sampler | QA Inspector |
| Telephone number of sampler | (510) 325-3065 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | AM Nut and Bolt | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | L78-051-18 | |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 3048578 | Nut Mfg. Lot Number(s) | 100786214 |
| Washer Mfg. Lot Number(s) | 21518850 | Bolt Specification | F1554 |
| Bolt Length(s) | 10 1/2" | Nut Specification | A563 |
| Washer Specification | F436 | Finish | HDG |
| Diameter/Size | 1/2" | Bolt Mfg. Lot Number | 3048578 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-09-26-4
DIME Test ID: 2018-09-26-4-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2018-10-12
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Fred
Date of test: 10/04/2018
UTM: 400KIP
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1A | Axial Pull .5 x 10\" x 4 F1554 Grade55 Anchor Bolt | 0.1419 | 11744 | 52 | 82763 | 57558 | 8168 | F1554 Axial Pull |
General comments (publicly viewable) (Max 1000 characters): F1554 Axial Pull
Test Graph
Source: Partner Data Point FileTest was verified on 10/5/2018 ✔