Summary for Test 2017-05-17-15-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 212886 DEA: 023H1204 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-5-R0.0/R22.4 |
| Award Date | 01/03/2018 |
| Closeout Date | 02/06/2019 |
| Work Description | COLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR |
| Location Description | TEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE |
| QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
| Sample Taken Date | 05/17/2017 | Sample Unique Key | 15 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/05/2017 | Sample type | Verification |
| A brief description of the sample | Laboratory-Combined Untreated Virgin 3/4-inch Type A Aggregate | The quantity of what the sample constitutes | JMF Verification |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Joseph |
| Last name of sampler or witnessed by | Sturges | Title of sampler | PEI Tech |
| Telephone number of sampler | Unknown | Laboratory sample identification | D76918F |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Tullis, Inc - Northstate Asphalt - Redding, CA |
| Transportation Laboratory (TL) Number | 851339 | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057::SHASTA RANCH AGGREGATES |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Combined Virgin Aggregate | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile at the Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | 17-04-S1 | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-05-17-15
DIME Test ID: 2017-05-17-15-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2018-07-13
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: NRML-R
Date of test: 05/05/2017
| Cumulative Percent Passing | ||||||
|---|---|---|---|---|---|---|
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 90.2 % | ||||||
| 71.9 % | ||||||
| 52.4 % | ||||||
| 45.1 % | ||||||
| 29.8 % | ||||||
| 20.2 % | ||||||
| 14 % | ||||||
| 9.6 % | ||||||
| 6.7 % | ||||||
| 5.01 % | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/13/2018 ✔