DIME - Sample Record for DIME Sample ID 2017-05-17-15

DIME » All Projects » Project - DEA: 023H1204 » Sample 2017-05-17-15 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2017-05-17-15

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212886 DEA: 023H1204
DIST-CO-RTE-PM	02-TEH-5-R0.0/R22.4
Award Date	01/03/2018
Closeout Date	02/06/2019
Work Description	COLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR
Location Description	TEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE
QA Service Level	1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date	05/17/2017	Sample Unique Key	15
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/05/2017
Sample type	Verification	A brief description of the sample	Laboratory-Combined Untreated Virgin 3/4-inch Type A Aggregate
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Joseph	Last name of sampler or witnessed by	Sturges
Title of sampler	PEI Tech	Telephone number of sampler	Unknown
Laboratory sample identification	D76918F	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Tullis, Inc - Northstate Asphalt - Redding, CA	Transportation Laboratory (TL) Number	851339
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample	Combined Virgin Aggregate	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Stockpile at the Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	17-04-S1	Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set
HMA Pay	No

JMF Information

Verification ID	JMF3513-2018-21	Date Created	07/12/2018
JMF Submittal ID	JMF3511-22-2018-36	JMF Status	Submittal Authorized For Use
Producer Mix ID	L170107	Authorized Date	04/26/2018

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2017-05-17-15-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	NRML-R, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-2	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Mike Cruz, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-3	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	NRML-R, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-4	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	NRML-R, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-5	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	NRML-R, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-6	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-7	AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)	Benjamin Lenz, CT D02 - Redding Northern Regional Laboratory	07/24/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-8	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-9	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	Cruz and Vallasek, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018
2017-05-17-15-10	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	NRML-R, CT D02 - Redding Northern Regional Laboratory	05/05/2017	Ward Jenkins	Yes	07/13/2018

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-05-17-15-1 AASHTO T27-14 (Verified)
DIME Test ID: 2017-05-17-15-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2017-05-17-15-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2017-05-17-15-4 AASHTO T85-13 (Verified)
DIME Test ID: 2017-05-17-15-5 AASHTO T84-14 (Verified)
DIME Test ID: 2017-05-17-15-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2017-05-17-15-7 AASHTO T104-99r16 (Verified)
DIME Test ID: 2017-05-17-15-8 AASHTO T176-08 (Verified)
DIME Test ID: 2017-05-17-15-9 AASHTO T210-15 (Verified)
DIME Test ID: 2017-05-17-15-10 AASHTO T304-11 (Verified)
DIME Test ID: 2017-05-17-15-11 ASTM D4791-10 (Verified)