Summary for Test 2018-06-01-8-3
Test performed: ASME B1.2-83r01Project Information
| Project Identifiers | Project ID: 211889 DEA: 08368514 EFIS: 0813000077 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-81.1/87.5&177.3/181.1 |
| Award Date | 05/02/2017 |
| Closeout Date | 12/09/2019 |
| Work Description | CONSTRUCT AIF AND DEMOLISH EXISTING AIF IN YERMO |
| Location Description | SAN BERNARDINO COUNTY FROM 0.6 MILE NORTH OF YERMO ROAD OVERCROSSING TO 1.0 MILE SOUTH OF MINNEOLA ROAD OVERCROSSING AND FROM 1.2 MILE NORTH OF NIPTON ROAD OVERCROSSING TO 0.5 MILE SOUTH OF YATES WELL ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 04/07/2017) |
Sample Information
| Sample Taken Date | 06/01/2018 | Sample Unique Key | 8 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/04/2018 | Sample type | Quality Assurance |
| A brief description of the sample | F1554 anchor rod | The quantity of what the sample constitutes | 1 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | David |
| Last name of sampler or witnessed by | Flygare | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | EDSCO |
| Transportation Laboratory (TL) Number | C720604 | Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-113-18 |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 3072836 | Nut Mfg. Lot Number(s) | HDG DDYD |
| Washer Mfg. Lot Number(s) | 249368 | Bolt Specification | F1554 Gr 55 |
| Bolt Length(s) | 4'-5" | Nut Specification | A194/A563 |
| Washer Specification | F436 | Finish | HDG/Plain |
| Diameter/Size | 1.5 | Bolt Mfg. Lot Number | |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-06-01-8
DIME Test ID: 2018-06-01-8-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Test Release Date: 2018-06-20
Test Results
Input Type: Calculated
Tester's full name: Brian Ewing
Date of test: 06/08/2018
Sample No.: 1A
Rocap Number: no data
Heat Number(s): 3072836
Mfg. Lot Number: no data
Finish Coating: Plain and ASTM F2329 - Hot Dip
Product Markings: YELLOW PAINT
Size: 1.5 in
Bolt Length: no data
Gage Type: Pass
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/13/2018 ✔