Summary for Test 2026-08-18-9-6
Test performed: ASTM D8225-19Project Information
| Project Identifiers | DEA: No Project |
|---|---|
| DIST-CO-RTE-PM | --- |
| Award Date | Not set |
| Closeout Date | 11/01/2022 |
| Work Description | Special project identifier for material not associated with a project |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 08/18/2026 | Sample Unique Key | 9 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | Not set |
| Sample type | Informational | A brief description of the sample | half inch HMA sample |
| The quantity of what the sample constitutes | 200 | From where was the sample collected | Source |
| First name of sampler or witnessed by | John | Last name of sampler or witnessed by | Doe |
| Title of sampler | Telephone number of sampler | Not set | |
| Laboratory sample identification | -694408626 | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | Stonemont Solutions | Transportation Laboratory (TL) Number | Not set |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | D35AC6531 |
| Binder content (%) | 2.4 | Virgin binder PG | PG 70-10 |
| Design binder PG | Binder Supplier | Valero | |
| RAP content (%) | 14 | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-08-18-9
DIME Test ID: 2026-08-18-9-6
Testing Lab: Stonemont Solutions, Incorporated
Test Method: ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature
Test Release Date: 2026-08-18
Test Results
Number of specimens: 3
Specimen Preparation method: PMLC
Input Type: Calculated
Tester's full name: John Doe
Date of test: 08/18/2026
| 1 | 2 | 3 | Average | Standard Deviation | Coefficient of Variability | |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| None | ||||||
| None | ||||||
| 25 C | ||||||
| Water Bath | ||||||
| 7.1 % | 6.3 % | 7.4 % | 6.9 % | 0.57 | 0 % | |
| 62.0 mm | 62.2 mm | 62.1 mm | 62.1 mm | |||
| 150.0 mm | 150.0 mm | 150.0 mm | 150 mm | |||
| 5.8 mm | 6.1 mm | 2.9 mm | 4.7 mm | 1.8 | 0 % | |
| 8.3 kN | 5.6 kN | 10.3 kN | 7.8 kN | 2.36 | 0 % | |
| 3 N/m | 2 N/m | 3 N/m | 3.2 N/m | 0.5 | 0 % | |
| 7356 Joules/m^2 | 8223 Joules/m^2 | 7231 Joules/m^2 | 7591 Joules/m^2 | 540 | 0 % | |
| 58.47 Joules | 38.05 Joules | 34.74 Joules | 42.6 Joules | 12.852 | 0 % | |
| 73.8 | 113.0 | 86.8 | 89.8 | 19.97 | 0 % | |
| 175.0 psi | 180.0 psi | 185.0 psi | 180 psi | 5 | 0 % | |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/18/2026 ✔