Summary for Test 2026-04-15-41-4
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 994539 DEA: 021H58U4 EFIS: 0223000059 |
|---|---|
| DIST-CO-RTE-PM | 02-PLU-70-58.2/R78.4 |
| Award Date | 06/27/2023 |
| Closeout Date | Not set |
| Work Description | RECONSTRUCT ROADWAY, HMA PAVING, DRAINAGE AND ELECTRICAL WORK. |
| Location Description | PLUMAS COUNTY AT AND NEAR CROMBERG FROM GILL RANCH ROAD TO 0.2 MILE WEST OF BIG GRIZZLY CREEK BRIDGE |
| QA Service Level | 1 (Verified on 05/08/2023) |
Sample Information
| Sample Taken Date | 04/15/2026 | Sample Unique Key | 41 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/16/2026 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 34 Totes | From where was the sample collected | Source |
| First name of sampler or witnessed by | GILBERTO | Last name of sampler or witnessed by | GONZALEZ |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 925-913-9199 |
| Laboratory sample identification | 26-015 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | 209KBP |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ6D00579T |
|---|---|---|---|
| Batch Number | AZ6D00579T | Mix number | AZ6D00579T |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-04-15-41
DIME Test ID: 2026-04-15-41-4
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2026-04-29
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Laura Bird
Date of test: 04/22/2026
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.483 in
Sample 1 Thickness: 0.268 in
Sample 1 Area: 0.1294 in^2
Sample 1 Ultimate Strength Actual: 372 lbs
Sample 1 percent elongation: 66.6 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.483 in
Sample 2 Thickness: 0.269 in
Sample 2 Area: 0.1299 in^2
Sample 2 Ultimate Strength Actual: 387 lbs
Sample 2 percent elongation: 70.5 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.484 in
Sample 3 Thickness: 0.255 in
Sample 3 Area: 0.1234 in^2
Sample 3 Ultimate Strength Actual: 380 lbs
Sample 3 percent elongation: 72.8 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.483 in
Sample 4 Thickness: 0.262 in
Sample 4 Area: 0.1265 in^2
Sample 4 Ultimate Strength Actual: 361 lbs
Sample 4 percent elongation: 65.7 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.483 in
Sample 5 Thickness: 0.27 in
Sample 5 Area: 0.1304 in^2
Sample 5 Ultimate Strength Actual: 375 lbs
Sample 5 percent elongation: 66.9 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.484 in
Sample 6 Thickness: 0.265 in
Sample 6 Area: 0.1283 in^2
Sample 6 Ultimate Strength Actual: 417 lbs
Sample 6 percent elongation: 77.2 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 2874.8 psi
Sample 2 Ultimate strength : 2979.2 psi
Sample 3 Ultimate strength: 3079.4 psi
Sample 4 Ultimate strength: 2853.8 psi
Sample 5 Ultimate strength: 2875.8 psi
Sample 6 Ultimate strength : 3250.2 psi
Ultimate Strength Average: 2986 psi
Percent Elongation Average: 70 %
General comments (publicly viewable) (Max 1000 characters): Accepted supplier's result.
Test was verified on 4/29/2026 ✔