Summary for Test 2025-08-25-90-2
Test performed: AASHTO T209-12Project Information
| Project Identifiers | Project ID: 1000540 DEA: 051Q03U4 EFIS: 0524000192 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO,KER-46-60.3/60.8,0.0/0.4 |
| Award Date | 12/13/2024 |
| Closeout Date | 05/04/2026 |
| Work Description | VERTICAL CURVE AND EXTEND EXISTING TRUCK CLIMBING LANE. |
| Location Description | SAN LUIS OBISPO AND KERN COUNTIES NEAR CHOLAME FROM 2.0 MILES EAST OF ANTELOPE ROAD TO 0.4 MILE EAST OF THE KERN COUNTY LINE. |
| QA Service Level | 1 (Verified on 09/09/2024) |
Sample Information
| Sample Taken Date | 08/25/2025 | Sample Unique Key | 90 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/26/2025 | Sample type | Acceptance |
| A brief description of the sample | 3x HMA cores | The quantity of what the sample constitutes | 549 Tons |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Michael |
| Last name of sampler or witnessed by | Gonzalez | Title of sampler | G3 |
| Telephone number of sampler | Laboratory sample identification | 250825-L2SL10 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Papich Construction | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 2 |
| Sublot number | 10 | HMA Mix Number | 39AC34LMA |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-08-25-90
DIME Test ID: 2025-08-25-90-2
Testing Lab: CT D05 - Whitley Gardens Field Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2025-09-08
Test Results
Number of tests: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Water
Input Type: Measured
Tester's full name: Will Wojdylak
Date of test: 08/27/2025
Method Performed: Mechanical Agitation - Method A
Mass of oven-dry sample in air for Sample 1: 2577.8 grams
Mass of sample in water for Sample 1: 1511.4 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.417
Theoretical maximum density at 25°C (77°F): 150.4 lb/ft^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/8/2025 ✔