Summary for Test 2024-05-13-113-2
Test performed: CTM 524-March 2013Project Information
| Project Identifiers | Project ID: 994396 DEA: 07330304 EFIS: 0716000213 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-10-22.0/30.8 |
| Award Date | 10/09/2023 |
| Closeout Date | 09/25/2025 |
| Work Description | CONSTRUCT CONCRETE BARRIER AND STRUCTURAL CONCRETE BARRIER SLAB. |
| Location Description | LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM 0.6 MILE EAST OF ROUTE 710/10 SEPARATION TO 0.3 MILE WEST OF ROUTE 10/605 SEPARATION |
| QA Service Level | 1 (Verified on 07/24/2023) |
Sample Information
| Sample Taken Date | 05/13/2024 | Sample Unique Key | 113 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/13/2024 |
| Sample type | Quality Control | A brief description of the sample | ISR-RSC |
| The quantity of what the sample constitutes | 6 Beams | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Paul | Last name of sampler or witnessed by | Pastora |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | CTS-65-EHI | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Short Load Concrete | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | slab | Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | CTS-65-EHI |
|---|---|---|---|
| The truck number from where the sample was collected | 8 | The batch plant ticket number from where the sample was collected | NI |
| Concrete batch plant | Short Load Concrete | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | Rte10 WB between Peck Rd North and South Off-Ramps, in the center divider | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-05-13-113
DIME Test ID: 2024-05-13-113-2
Testing Lab: RMA Group - Rancho Cucamonga
Test Method: CTM 524-March 2013: Method of Test for Flexural Strength Of Rapid Strength Concrete
Test Release Date: 2025-07-29
Test Results
Number of specimens: 3
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Fracture occurred at a capped section: No
Is a beam dimensional correction factor used?: No
Input Type: Calculated
Tester's full name: Jesse Lara
Date of test: 05/17/2024
Identification number: Set 1
Width of specimen: 6 inch
Width of specimen 2: 5.9375 inch
Width of specimen 3: 6 inch
Depth of specimen: 6.125 inch
Depth of specimen 2: 6.125 inch
Depth of specimen 3: 6.25 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Span length of specimen 3: 18 inch
Maximum load applied: 7790 lb
Maximum load applied 2: 7810 lb
Maximum load applied 3: 8180 lb
Curing history and apparent moisture condition of the specimen: Moist
If specimen was capped, ground or if leather shims were used: Leather shims
Defects in specimen, including numbers of beams discarded during test: No
Age of specimen: 3 days
Age of specimen in hours: 0 hours
Modulus of rupture: 660 psi
Modulus of rupture 2: 670 psi
Modulus of rupture 3: 680 psi
Modulus of rupture average: 670 psi
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 22-1987 Concrete 2024-05-13 ISR-RSC CTS-65-EHI | 283.36 KB | 07/29/2025 | 2024-05-13-113-2 | Info |
Test was verified on 7/29/2025 ✔