Summary for Test 2025-06-19-63-1
Test performed: AASHTO T315-24
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
| Project Identifiers | Project ID: 993331 DEA: 023H6904 EFIS: 0218000010 |
|---|---|
| DIST-CO-RTE-PM | 02-PLU-89-30/R42.1 |
| Award Date | 11/21/2024 |
| Closeout Date | Not set |
| Work Description | ALMANOR WEST REHAB - ROADWAY REHABILITATION |
| Location Description | IN PLUMAS COUNTY NEAR CANYON DAM FROM LAKE ALMANOR SPILLWAY TO ROUTE 36. |
| QA Service Level | 1 (Verified on 10/14/2021) |
Sample Information
| Sample Taken Date | 06/19/2025 | Sample Unique Key | 63 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/30/2025 | Sample type | Quality Assurance |
| A brief description of the sample | binder | The quantity of what the sample constitutes | 2 cans |
| From where was the sample collected | Source | First name of sampler or witnessed by | GGI |
| Last name of sampler or witnessed by | Sloaterman | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Albina - Klamath Falls, OR | |
| Transportation Laboratory (TL) Number | 857997 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Dig it Construction, Chester Plant | |
| Certified Asphalt Supplier | Albina Asphalt (Klamath Falls Plant) - Klamath Falls OR | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-06-19-63
DIME Test ID: 2025-06-19-63-1
Testing Lab: Atlas - Denver
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2025-07-29
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Atlas
Date of test: 07/21/2025
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.06 %
Stress Amplitude: 0.344 kPa
Phase Angle (δ) (for the 10 cycles): 84.7 degree
Complex Modulus (G*) (for the 10 measurements): 2.852 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 2.86 kPa
General comments (publicly viewable) (Max 1000 characters): OG
Test was verified on 7/29/2025 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.