Summary for Test 2025-05-23-32-1

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 994539
DEA: 021H58U4
EFIS: 0223000059
DIST-CO-RTE-PM02-PLU-70-58.2/R78.4
Award Date06/27/2023
Closeout DateNot set
Work DescriptionRECONSTRUCT ROADWAY, HMA PAVING, DRAINAGE AND ELECTRICAL WORK.
Location DescriptionPLUMAS COUNTY AT AND NEAR CROMBERG FROM GILL RANCH ROAD TO 0.2 MILE WEST OF BIG GRIZZLY CREEK BRIDGE
QA Service Level1 (Verified on 05/08/2023)

Sample Information

Sample Taken Date05/23/2025 Sample Unique Key32
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/27/2025
Sample typeAcceptance A brief description of the sample2 bags 3/4-inch Class 2 Aggregate Base, Field No. 2025-1
The quantity of what the sample constitutesStockpile @ STA 745+00 From where was the sample collectedJob Site
First name of sampler or witnessed byJeff Last name of sampler or witnessed byMcKeehan
Title of samplerMT Telephone number of sampler
Laboratory sample identificationD79895 Linked DIME Sample ID
The fabricator/manufacturer/facility nameUndeclared Transportation Laboratory (TL) Number802373
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid Item3863350

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Undeclared
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedStockpile @ 745+00
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Test Details

DIME Sample ID: 2025-05-23-32
DIME Test ID: 2025-05-23-32-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2025-06-12

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Sean Mcwithey
Date of test: 05/30/2025
Sieve SizeCumulative Mass RetainedCumulative Percent Passing
13407 grams
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
94.0 grams99 %
3055.0 grams77 %
4762.0 grams64 %
7618.0 grams43 %
515 grams
142.8 grams31 %
226.2 grams24 %
282.3 grams19 %
323.9 grams16 %
366.5 grams12 %
403.8 grams9 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/12/2025