Summary for Test 2025-04-30-12-1
Test performed: ASTM A970-18Project Information
| Project Identifiers | Project ID: 994525 DEA: 031H9904 EFIS: 0317000043 |
|---|---|
| DIST-CO-RTE-PM | 03-PLA,NEV-80-68.3/69.7,0.0/R2.7 |
| Award Date | 11/07/2023 |
| Closeout Date | Not set |
| Work Description | RDWY EXC, PLACE HMA & JPCP, SLAB REPLACEMENT & POLYESTER CONC OVERLAY. |
| Location Description | PLACER AND NEVADA COUNTIES NEAR KINGVALE FROM 0.3 MILE WEST OF TROY UNDERCROSSING TO 0.2 MILE EAST OF SODA SPRINGS OVERCROSSING |
| QA Service Level | 1 (Verified on 05/15/2023) |
Sample Information
| Sample Taken Date | 04/30/2025 | Sample Unique Key | 12 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/01/2025 | Sample type | Quality Assurance |
| A brief description of the sample | #11 HRC 120 headed bars | The quantity of what the sample constitutes | 4 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | NA |
| Last name of sampler or witnessed by | NA | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | HRC | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Headed Bars | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Rebar Heat Number(s) | 3500037641 | Head Manufacturer Lot Number(s) | 100022341544 |
| Rebar Size | #11 | Headed Bar Model Name | HRC 120 |
| Size of Head | Full Size - 9x | Head Connection Type | |
| Head Shape | Square | Rebar Manufacturer | Nucor |
| Head Manufacturer | Nucor | Head Fabricator | HRC |
| Material Standard Code | ASTM A706 | Headed Bar Unique ID | 9FW-17-03 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-04-30-12
DIME Test ID: 2025-04-30-12-1
Testing Lab: Atlas - Oakland
Test Method: ASTM A970-18: Standard Specification for Headed Steel Bars for Concrete Reinforcement (Tensile)
Test Release Date: 2025-06-04
Test Results
Number of Headed Bar Samples: 4
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 06/03/2025
UTM: NA
Temperature: 72 f
| Num | Lot # | Area (sqin) | Peak Load (lbf) | Tensile Strength (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|
| 1 | 1 | 1.56 | 137600 | 88210 | NA | Miguel Baltazar |
| 2 | 1 | 1.56 | 142000 | 91030 | NA | Miguel Baltazar |
| 3 | 1 | 1.56 | 141180 | 90500 | NA | Miguel Baltazar |
| 4 | 1 | 1.56 | 141830 | 90920 | NA | Miguel Baltazar |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/4/2025 ✔