Summary for Test 2025-03-26-9-2
Test performed: ASTM D412-16r21Project Information
| Project Identifiers | Project ID: 994084 DEA: 060U8804 EFIS: 0616000074 |
|---|---|
| DIST-CO-RTE-PM | 06-TUL-99-26.3/27.6 |
| Award Date | 01/23/2023 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT A NEW INTERCHANGE AT COMMERCIAL AVENUE NOW CALLED INTERNATIONAL AGRI-CENTER WAY |
| Location Description | ON STATE ROUTE 99 |
| QA Service Level | 1 (Verified on 03/13/2023) |
Sample Information
| Sample Taken Date | 03/26/2025 | Sample Unique Key | 9 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 03/26/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 2.88"x14"x16" Bearing pad |
| The quantity of what the sample constitutes | 27 | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | R | Last name of sampler or witnessed by | Crawford |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Scougal Rubber | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 24326-1 |
|---|---|---|---|
| Material/Compound/Elastomer ID | NA | Samples Representing | 27 |
| Description (size) | 2.88x14x16 | Comments | |
| Description (Number of Shims) | 5 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
| Batch Number | 24326-1 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-03-26-9
DIME Test ID: 2025-03-26-9-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2025-04-09
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: psi
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 04/09/2025
UTM: NA
Humidity: 0 %
Temperature: 0 f
Sample 1 Median Thickness: 0.081 in
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2675 psi
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.081 in
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2577 psi
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.09 in
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2691 psi
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2675 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/9/2025 ✔