Summary for Test 2025-03-05-11-2
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 1000017 DEA: 042Q7004 EFIS: 0419000040 |
|---|---|
| DIST-CO-RTE-PM | 04-CC-4-L0.0/R14.3 |
| Award Date | 04/26/2024 |
| Closeout Date | Not set |
| Work Description | REPLACE ASPHALT CONCRETE SURFACING AND INSTALL MGS. |
| Location Description | CONTRA COSTA COUNTY IN HERCULES AND CONCORD FROM SAN PABLO AVENUE TO ROUTE 4/242 SEPARATION |
| QA Service Level | 1 (Verified on 01/08/2024) |
Sample Information
| Sample Taken Date | 03/05/2025 | Sample Unique Key | 11 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/06/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA 15% rap WMA Mix |
| The quantity of what the sample constitutes | Sample Collected around 100 tons | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Christian | Last name of sampler or witnessed by | Souza |
| Title of sampler | Lab Technician | Telephone number of sampler | |
| Laboratory sample identification | 13 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Dutra Materials Richmond | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 3 | HMA Mix Number | L230097 |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-03-05-11
DIME Test ID: 2025-03-05-11-2
Testing Lab: CT D04 - Concord Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2025-03-11
Test Results
What temperature unit is used?: Celsius
Input Type: Calculated
Tester's full name: Christian Souza
Date of test: 03/06/2025
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 2100.8 g
Mass Loss: 115.6 g
Correction Factor (Percent by mass of HMA Specimen): 0.95 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.14 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 4.41 %
General comments (publicly viewable) (Max 1000 characters): Oil Content Out of Specification OBC 5.0 Range 4.7 - 5.5
Test was verified on 3/11/2025 ✔