Summary for Test 2017-08-28-13-4
Test performed: ASME B1.2-83r01Project Information
| Project Identifiers | Project ID: 211810 Permit Numbers: 0713NUL2279 0716NRW1416 0717NRW1667 0717NRT0827 07176DP0881 07176RT1257 |
|---|---|
| DIST-CO-RTE-PM | 07--1-30.4/30.4 |
| Award Date | 02/01/2014 |
| Closeout Date | 06/16/2021 |
| Work Description | Attaching 6-8" and 2-4" conduits for the length of 330' each conduit to existing structure of Ballona Creek Bridge(BR#53-0118). This is the parent permit of the following permits: 0716NRW1416, 0717NRW1667, 0717NRT0827, 07176DP0881. |
| Location Description | Lincoln Blvd. @ Ballona Creek Bridge (#53-0118), Los Angeles. This is the parent permit of the following permits: 0716NRW1416, 0717NRW1667, 0717NRT0827, 07176DP0881. |
| QA Service Level | 1 (Verified on 09/29/2016) |
Sample Information
| Sample Taken Date | 08/28/2017 | Sample Unique Key | 13 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/08/2017 | Sample type | Quality Assurance |
| A brief description of the sample | A325 TC Bolt assy | The quantity of what the sample constitutes | 3 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Tony |
| Last name of sampler or witnessed by | D Le | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | St Louis Screw Bolt |
| Transportation Laboratory (TL) Number | NA | Inspector Lot Number from the Transportation Laboratory (TL) Form | NA |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 25728-20492560 |
|---|---|---|---|
| Heat Number(s) | Nut Mfg. Lot Number(s) | 25676-177114, | |
| Washer Mfg. Lot Number(s) | d3236 | Bolt Specification | A325 TC |
| Bolt Length(s) | 2 | Nut Specification | A563 |
| Washer Specification | F436 | Finish | B695 |
| Diameter/Size | .750 | Bolt Mfg. Lot Number | 25728-20492560 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-08-28-13
DIME Test ID: 2017-08-28-13-4
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Test Release Date: 2017-09-21
Test Results
Input Type: Calculated
Tester's full name: Fred Saylor
Date of test: 09/14/2017
Sample No.: 1C
Rocap Number: no data
Heat Number(s): no data
Mfg. Lot Number: 25728-20492560
Finish Coating: ASTM B695 - Mech Galv
Product Markings: A325 TC USA
Size: .750 in
Bolt Length: 2 in
Gage Type: Pass
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/14/2017 ✔