Summary for Test 2024-10-14-100-2
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 994588 DEA: 081H3904 EFIS: 0817000032 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-R20.5/R21.6,R25.5/R30.7 |
| Award Date | 07/13/2023 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT BUILDING, ROADWAY EXC, JPCP, AND TEMPORARY BARRIER SYSTEM. |
| Location Description | SAN BERNARDINO COUNTY FROM 0.6 MILE NORTH OF CLEGHORN ROAD UNDERCROSSING TO 0.5 MILE SOUTH OF ROUTE 138 AND FROM 0.5 MILE SOUTH OF TRUCK SAFETY CHECK AREA TO 0.4 MILE NORTH OF OAK HILL ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
| Sample Taken Date | 10/14/2024 | Sample Unique Key | 100 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/14/2024 |
| Sample type | Acceptance | A brief description of the sample | 3/4" HMA-A PG64-28M |
| The quantity of what the sample constitutes | 938.48 @ 12:09 PM | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Gabriel | Last name of sampler or witnessed by | Ramirez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan - Oro Grande | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0022 / 91-36-0046 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Oro Grande Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 224112A ORO SJR |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2024-12-13: HMA Aggregates (Size 3/4"): Type A HMA - Batch Plant - Sieve Analysis With RAP | 2 | 2024-10-14-100-2 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-10-14-100
DIME Test ID: 2024-10-14-100-2
Testing Lab: CT D08 - Fontana Field Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-12-30
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Gabriel Ramirez
Date of test: 10/18/2024
| Cumulative Percent Passing | ||||||
|---|---|---|---|---|---|---|
| % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 97 % | ||||||
| 61 % | ||||||
| 9 % | ||||||
| 1 % | ||||||
| 1 % | ||||||
| 0 % | ||||||
| 0 % | ||||||
| 0 % | ||||||
| 0 % | ||||||
| 0 % | ||||||
General comments (publicly viewable) (Max 1000 characters): 1/2"
Test was verified on 12/30/2024 ✔