Summary for Test 2024-11-01-58-4
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 1000521 DEA: 010P2604 EFIS: 0124000213 |
|---|---|
| DIST-CO-RTE-PM | 01-MEN-101-59.9 |
| Award Date | 07/01/2024 |
| Closeout Date | Not set |
| Work Description | Bridge Deck Replacement |
| Location Description | Long Valley Creek Bridge |
| QA Service Level | 1 (Verified on 08/14/2024) |
Sample Information
| Sample Taken Date | 11/01/2024 | Sample Unique Key | 58 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 11/26/2024 |
| Sample type | Quality Assurance | A brief description of the sample | #5 Lenton Coupler |
| The quantity of what the sample constitutes | 1290 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Oswaldo | Last name of sampler or witnessed by | Chavez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | CMC Erico | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Service | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | CMC |
| Coupler Manufacturer | Erico | Intermediate Assembler or Fabricator | |
| Rebar Size | #5 | Coupler Model | A2 |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
| Coupler Component Heat/Lot Number(s) | L9952 LA508 | Rebar Heat Number(s) | 4142917 6052300 4142866 4143016 4141949 |
| Rebar Size 2 | Coupler Unique ID | ST-17-01 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-11-01-58
DIME Test ID: 2024-11-01-58-4
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile Slip)
Test Release Date: 2024-12-09
Test Results
Number of Samples: 4
Input Type: Calculated
Tester's full name: Alexis Vargas-Bastida
Date of test: 12/06/2024
UTM: NA
Halo ID: 000
Temperature: 000 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Slip (inch) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | LOT 3 | 5 | 0.31 | 0.0021 | 29020 | 93613 | Atlas Technical Consultants | Miguel Baltazar |
| 2 | 2 | LOT 3 | 5 | 0.31 | 000 | 29450 | 95000 | Atlas Technical Consultants | Miguel Baltazar |
| 3 | 3 | LOT 3 | 5 | 0.31 | 000 | 28380 | 91548 | Atlas Technical Consultants | Miguel Baltazar |
| 4 | 4 | LOT 3 | 5 | 0.31 | 000 | 27920 | 90065 | Atlas Technical Consultants | Miguel Baltazar |
General comments (publicly viewable) (Max 1000 characters): Atlas Technical Consultants
Test was verified on 12/9/2024 ✔