Summary for Test 2017-08-10-2-1
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 211797 DEA: 080G8424 EFIS: 0814000184 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-R107.3 |
| Award Date | 12/29/2016 |
| Closeout Date | 06/23/2021 |
| Work Description | UPGRADE EXISTING SAFETY ROADSIDE REST AREAS (SRRA) |
| Location Description | SAN BERNARDINO COUNTY ABOUT 30 MILES EAST OF BARSTOW AT C.V. KANE SAFETY ROADSIDE REST AREA |
| QA Service Level | 1 (Verified on 02/08/2017) |
Sample Information
| Sample Taken Date | 08/10/2017 | Sample Unique Key | 2 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/21/2017 | Sample type | Verification |
| A brief description of the sample | 3/4 inch assorted anchor bolts | The quantity of what the sample constitutes | Various |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Ken |
| Last name of sampler or witnessed by | Varela | Title of sampler | Associate Steel Inspector |
| Telephone number of sampler | 562-229-9279 | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | California Steel Products |
| Transportation Laboratory (TL) Number | Unknown | Inspector Lot Number from the Transportation Laboratory (TL) Form | L08-076-17 |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | 145517 | Nut Mfg. Lot Number(s) | N/A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | F1554 Gr 36 |
| Bolt Length(s) | 7-7/8", 9", 9-1/2", 10" | Nut Specification | N/A |
| Washer Specification | N/A | Finish | hot-dip galvanized |
| Diameter/Size | 3/4" | Bolt Mfg. Lot Number | 145517 |
| Rocap Test Requirement(s) | No | Lubricant Requirements(s) | None |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-08-10-2
DIME Test ID: 2017-08-10-2-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2017-08-30
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Brian
Date of test: 08/22/2017
UTM: 400KIP
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1A | F1554 Gr 36 Bolt 10 Deg Wedge | 0.334 | 23605 | 105 | 70674 | 45412 | 15168 | F1554 Gr 36 Bolt |
General comments (publicly viewable) (Max 1000 characters): F1554 Gr 36 Bolt
Test Graph
Source: Partner Data Point FileTest was verified on 8/23/2017 ✔