Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-08-10-2

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211797
DEA: 080G8424
EFIS: 0814000184
DIST-CO-RTE-PM08-SBD-15-R107.3
Award Date12/29/2016
Closeout Date06/23/2021
Work DescriptionUPGRADE EXISTING SAFETY ROADSIDE REST AREAS (SRRA)
Location DescriptionSAN BERNARDINO COUNTY ABOUT 30 MILES EAST OF BARSTOW AT C.V. KANE SAFETY ROADSIDE REST AREA
QA Service Level1 (Verified on 02/08/2017)

Sample Information

Sample Taken Date08/10/2017 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/21/2017
Sample typeVerification A brief description of the sample3/4 inch assorted anchor bolts
The quantity of what the sample constitutesVarious From where was the sample collectedManufacturer
First name of sampler or witnessed byKen Last name of sampler or witnessed byVarela
Title of samplerAssociate Steel Inspector Telephone number of sampler562-229-9279
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameCalifornia Steel Products Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormL08-076-17 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)N/A
Heat Number(s)145517 Nut Mfg. Lot Number(s)N/A
Washer Mfg. Lot Number(s)N/A Bolt SpecificationF1554 Gr 36
Bolt Length(s)7-7/8", 9", 9-1/2", 10" Nut SpecificationN/A
Washer SpecificationN/A Finishhot-dip galvanized
Diameter/Size3/4" Bolt Mfg. Lot Number145517
Rocap Test Requirement(s)No Lubricant Requirements(s)None

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-08-10-2-1ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian
Yes
08/30/2017F1554 Gr 36 Bolt
2017-08-10-2-2ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian
Yes
08/30/2017F1554 Gr 36 Bolt
2017-08-10-2-3ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017
2017-08-10-2-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017
2017-08-10-2-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017
2017-08-10-2-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017
2017-08-10-2-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017
2017-08-10-2-8ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017
2017-08-10-2-9ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017
2017-08-10-2-10ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory08/22/2017Brian Ewing
Yes
08/30/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-08-10-2-1 ASTM F606-14 (Verified)
DIME Test ID: 2017-08-10-2-2 ASTM F606-14 (Verified)
DIME Test ID: 2017-08-10-2-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-08-10-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-21 ASTM B499-14 (Verified)
DIME Test ID: 2017-08-10-2-22 ASTM B499-14 (Verified)