Summary for Test 2024-04-29-29-1
Test performed: AASHTO T209-22Project Information
| Project Identifiers | Project ID: 994588 DEA: 081H3904 EFIS: 0817000032 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-R20.5/R21.6,R25.5/R30.7 |
| Award Date | 07/13/2023 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT BUILDING, ROADWAY EXC, JPCP, AND TEMPORARY BARRIER SYSTEM. |
| Location Description | SAN BERNARDINO COUNTY FROM 0.6 MILE NORTH OF CLEGHORN ROAD UNDERCROSSING TO 0.5 MILE SOUTH OF ROUTE 138 AND FROM 0.5 MILE SOUTH OF TRUCK SAFETY CHECK AREA TO 0.4 MILE NORTH OF OAK HILL ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
| Sample Taken Date | 04/29/2024 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/30/2024 |
| Sample type | Production Start-Up | A brief description of the sample | 3/4" HMA-A-SP R15 0.75%LAS |
| The quantity of what the sample constitutes | 16 BOXES OF HMA, 2 QTS OIL, I QT OF LAS | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | G | Last name of sampler or witnessed by | RAMIREZ |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | 0206A-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan-Oro Grande | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | 224112A ORO SJR | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-04-29-29
DIME Test ID: 2024-04-29-29-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2024-07-05
Test Results
Number of Samples: 1
What is the unit of measurement for theoretical density?: SI Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Jacob Bailey
Date of test: 05/03/2024
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7328.5 grams
Mass of oven-dry sample in air for Sample 1: 2559.8 grams
Mass of container filled with the sample and water for Sample 1: 8863.9 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.499
Theoretical maximum density at 25°C (77°F): 2492 kg/m^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/5/2024 ✔