Summary for Test 2024-06-24-88-2
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 994588 DEA: 081H3904 EFIS: 0817000032 |
---|---|
DIST-CO-RTE-PM | 08-SBD-15-R20.5/R21.6,R25.5/R30.7 |
Award Date | 07/13/2023 |
Closeout Date | Not set |
Work Description | CONSTRUCT BUILDING, ROADWAY EXC, JPCP, AND TEMPORARY BARRIER SYSTEM. |
Location Description | SAN BERNARDINO COUNTY FROM 0.6 MILE NORTH OF CLEGHORN ROAD UNDERCROSSING TO 0.5 MILE SOUTH OF ROUTE 138 AND FROM 0.5 MILE SOUTH OF TRUCK SAFETY CHECK AREA TO 0.4 MILE NORTH OF OAK HILL ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
Sample Taken Date | 06/24/2024 | Sample Unique Key | 88 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/24/2024 |
Sample type | Acceptance | A brief description of the sample | 1" PCC |
The quantity of what the sample constitutes | 90 CY @ 02:24am | From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Jareerattana | Last name of sampler or witnessed by | Sirisujarittham |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Hi-Grade Materials Co. - Hesperia | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0046 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at Hi-Grade Materials Co. Hesperia | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
The concrete mix design number | CT675F25A | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-06-24-88
DIME Test ID: 2024-06-24-88-2
Testing Lab: CT D08 - Fontana Field Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2024-07-05
Test Results
What size aggregate is being tested?: 0.375 in x No. 8 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: MaryAnna Landaverde
Date of test: 06/24/2024
Cumulative percent passing the 1/2 in. sieve: 100 %
Cumulative percent passing the 3/8 in. sieve: 91 %
Cumulative percent passing the #4 sieve: 17 %
Cumulative percent passing the #8 sieve: 4 %
General comments (publicly viewable) (Max 1000 characters): 3/8" x No. 8
Test was verified on 7/5/2024 ✔