Summary for Test 2024-04-19-30-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 994525 DEA: 031H9904 EFIS: 0317000043 |
|---|---|
| DIST-CO-RTE-PM | 03-PLA,NEV-80-68.3/69.7,0.0/R2.7 |
| Award Date | 11/07/2023 |
| Closeout Date | Not set |
| Work Description | RDWY EXC, PLACE HMA & JPCP, SLAB REPLACEMENT & POLYESTER CONC OVERLAY. |
| Location Description | PLACER AND NEVADA COUNTIES NEAR KINGVALE FROM 0.3 MILE WEST OF TROY UNDERCROSSING TO 0.2 MILE EAST OF SODA SPRINGS OVERCROSSING |
| QA Service Level | 1 (Verified on 05/15/2023) |
Sample Information
| Sample Taken Date | 04/19/2024 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/22/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / 9800 RESIN |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | GILBERTO | Last name of sampler or witnessed by | GONZALEZ |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 17076245467 |
| Laboratory sample identification | 000055KBP | Linked DIME Sample ID | 000055KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4D00518 |
|---|---|---|---|
| Batch Number | AZ4D00518 | Mix number | AZ4D00518 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-04-19-30
DIME Test ID: 2024-04-19-30-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-05-22
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 04/24/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.487 in
Sample 1 Thickness: 0.263 in
Sample 1 Area: 0.1281 in^2
Sample 1 Ultimate Strength Actual: 1074 lbs
Sample 1 percent elongation: 23.9 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.487 in
Sample 2 Thickness: 0.273 in
Sample 2 Area: 0.133 in^2
Sample 2 Ultimate Strength Actual: 1114 lbs
Sample 2 percent elongation: 13.8 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.487 in
Sample 3 Thickness: 0.259 in
Sample 3 Area: 0.1261 in^2
Sample 3 Ultimate Strength Actual: 1064.9 lbs
Sample 3 percent elongation: 14.3 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.487 in
Sample 4 Thickness: 0.266 in
Sample 4 Area: 0.1295 in^2
Sample 4 Ultimate Strength Actual: 1089 lbs
Sample 4 percent elongation: 15.3 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.488 in
Sample 5 Thickness: 0.26 in
Sample 5 Area: 0.1269 in^2
Sample 5 Ultimate Strength Actual: 1073 lbs
Sample 5 percent elongation: 18.4 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.487 in
Sample 6 Thickness: 0.266 in
Sample 6 Area: 0.1295 in^2
Sample 6 Ultimate Strength Actual: 1092 lbs
Sample 6 percent elongation: 12.8 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 8384.1 psi
Sample 2 Ultimate strength : 8375.9 psi
Sample 3 Ultimate strength: 8444.9 psi
Sample 4 Ultimate strength: 8409.3 psi
Sample 5 Ultimate strength: 8455.5 psi
Sample 6 Ultimate strength : 8432.4 psi
Ultimate Strength Average: 8417 psi
Percent Elongation Average: 16 %
General comments (publicly viewable) (Max 1000 characters): Accepted Vendors Results
Test was verified on 5/22/2024 ✔