Summary for Test 2024-01-15-11-5
Test performed: CTM 521-June 2020Project Information
| Project Identifiers | Project ID: 994116 DEA: 010J4104 EFIS: 0119000025 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-299-30.7/33.4 |
| Award Date | 11/23/2022 |
| Closeout Date | Not set |
| Work Description | Project Name: HUM-299 Curve Improvement |
| Location Description | HUMBOLDT COUNTY NEAR WILLOW CREEK FROM 0.1 MILE EAST OF CEDAR CREEK ROAD TO 0.1 MILE EAST OF EAST FORK WILLOW CREEK BRIDGE |
| QA Service Level | 1 (Verified on 07/29/2022) |
Sample Information
| Sample Taken Date | 01/15/2024 | Sample Unique Key | 11 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/21/2024 |
| Sample type | Quality Assurance | A brief description of the sample | TYPE II/V CEMENT |
| The quantity of what the sample constitutes | 6 4x8 FIELD CURE concrete cylinders | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Tatjana | Last name of sampler or witnessed by | Halda |
| Title of sampler | ASR | Telephone number of sampler | 707 599-5669 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Eureka Ready Mix | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | 12-04E0054 | |
| Structure name | RW B2 |
Material Information
| Material Type | Concrete | The concrete mix design number | E675WRF |
|---|---|---|---|
| The truck number from where the sample was collected | 84 | The batch plant ticket number from where the sample was collected | 34121 |
| Concrete batch plant | Arcata Eureka Ready Mix | The fabricator/manufacturer designation for the sample | Batch |
| A detailed description of where the material sample was collected | CHUTE FROM TRUCK | Where the material sample would have been placed if not sampled | RW B2 Waler 1 |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-01-15-11
DIME Test ID: 2024-01-15-11-5
Testing Lab: CT D01 - District 1 Materials Laboratory
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2024-02-26
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Leif Ayres
Date of test: 02/26/2024
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 48710 lb
Maximum load on cylinder 2: 50760 lb
Maximum load on cylinder 3: 46820 lb
Type of fracture pattern of cylinder 1: 5
Type of fracture pattern of cylinder 2: 5
Type of fracture pattern of cylinder 3: 5
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Correction factor for cylinder 3: 1
Age of specimen: 42 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength (to nearest 10 psi): 3880 psi
General comments (publicly viewable) (Max 1000 characters): 42 day break 2/26/24 Field Cure Cylinders
Test was verified on 2/26/2024 ✔