Summary for Test 2023-08-25-61-4
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 994731 DEA: 040Y3004 EFIS: 0422000265 |
---|---|
DIST-CO-RTE-PM | 04-SM-92-R10.4/R12.0 |
Award Date | 06/21/2023 |
Closeout Date | 03/04/2024 |
Work Description | COLD PLANE ASPHALT CONCRETE PAVEMENT AND OVERLAY WITH RHMA-G. |
Location Description | SAN MATEO COUNTY IN AND NEAR SAN MATEO FROM 0.2 MILE WEST OF ALAMEDA DE LAS PULGAS OVERCROSSING TO 92/101 SEPARATION |
QA Service Level | 1 (Verified on 05/09/2023) |
Sample Information
Sample Taken Date | 08/25/2023 | Sample Unique Key | 61 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/28/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2 RHMA-G |
The quantity of what the sample constitutes | 750 tons | From where was the sample collected | Job Site |
First name of sampler or witnessed by | M | Last name of sampler or witnessed by | TAYLOR |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Vulcan Materials - Pleasanton | Transportation Laboratory (TL) Number | C795178 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | 1 |
Sublot number | 5 | HMA Mix Number | D04 JMF 22 041 |
Test Details
DIME Sample ID: 2023-08-25-61
DIME Test ID: 2023-08-25-61-4
Testing Lab: CT D04 - Hayward Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-12-22
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Leonardo Mendoza
Date of test: 08/29/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3018.2 g
Mass of the specimen and specimen basket assembly prior to ignition: 4606.9 g
Mass of HMA Sample prior to ignition: 1588.7 g
Mass Loss: 140.9 g
Mass of aggregate remaining after ignition: 1447.8 g
Correction Factor (Percent by mass of HMA Specimen): 1.01 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.18 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 7.68 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/22/2023 ✔