Summary for Test 2023-10-06-51-2
Test performed: CTM 524-March 2013Project Information
| Project Identifiers | Project ID: 993870 DEA: 120R5604 EFIS: 1218000117 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-5,55,73,91,133,405-var |
| Award Date | 04/12/2023 |
| Closeout Date | Not set |
| Work Description | PLACE RHMA-G, HMA, SLAB REPLACEMENT AND JPCP. |
| Location Description | ORANGE COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 06/14/2022) |
Sample Information
| Sample Taken Date | 10/06/2023 | Sample Unique Key | 51 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/06/2023 |
| Sample type | Quality Assurance | A brief description of the sample | PCC Rapid set beams |
| The quantity of what the sample constitutes | 6 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | G3 | Last name of sampler or witnessed by | G3 |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 23-0298 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Security Paving - Volumetric | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | G3-21-CTS-220 |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 1 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Concrete from wheelbarrow | Where the material sample would have been placed if not sampled | Location 12 at SB73 Connector to SB55 |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-10-06-51
DIME Test ID: 2023-10-06-51-2
Testing Lab: CT D12 - Huntington Beach Field Laboratory
Test Method: CTM 524-March 2013: Method of Test for Flexural Strength Of Rapid Strength Concrete
Test Release Date: 2023-11-01
Test Results
Number of specimens: 3
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Fracture occurred at a capped section: No
Is a beam dimensional correction factor used?: No
Input Type: Calculated
Tester's full name: Kenny Do
Date of test: 10/09/2023
Identification number: B23-0298-3-2
Width of specimen: 6 inch
Width of specimen 2: 5.9375 inch
Width of specimen 3: 5.9375 inch
Depth of specimen: 6.0625 inch
Depth of specimen 2: 6.125 inch
Depth of specimen 3: 6.0625 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Span length of specimen 3: 18 inch
Maximum load applied: 7000 lb
Maximum load applied 2: 7690 lb
Maximum load applied 3: 7530 lb
Curing history and apparent moisture condition of the specimen: Sand pit/Lime water bath (Contract Specs.)
If specimen was capped, ground or if leather shims were used: No
Defects in specimen, including numbers of beams discarded during test: No
Age of specimen: 3 days
Age of specimen in hours: no data
Modulus of rupture: 600 psi
Modulus of rupture 2: 650 psi
Modulus of rupture 3: 650 psi
Modulus of rupture average: 630 psi
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| B23-0298 | 222.45 KB | 11/01/2023 | 2023-10-06-51-2 | Info |
Test was verified on 11/1/2023 ✔