DIME - Test Summary

Summary for Test 2023-09-22-32-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 215109 DEA: 081C8504 EFIS: 0813000047
DIST-CO-RTE-PM	08-RIV-74-0.0/5.8
Award Date	11/12/2020
Closeout Date	06/02/2025
Work Description	ROADWAY EXCAVATION, HOT MIX ASPHALT, AND STRUCTURAL SHOTCRETE WALLS.
Location Description	RIVERSIDE COUNTY NEAR LAKE ELSINORE FROM ORANGE COUNTY LINE TO MONTE VISTA STREET
QA Service Level	1 (Verified on 02/24/2021)

Sample Taken Date	09/22/2023	Sample Unique Key	32
Date that the sample was received by the laboratory/organization performing the testing	09/25/2023	Sample type	Verification
A brief description of the sample	PSUE 3/4" RHMA-G-SP 0.5% LAS	The quantity of what the sample constitutes	6 Bags Of Aggregate
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Nathan
Last name of sampler or witnessed by	Ogbasellasie	Title of sampler
Telephone number of sampler		Laboratory sample identification	0493G-23
Linked DIME Sample ID		The fabricator/manufacturer/facility name	MM-Lake Elsinore
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0098
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at MM-Lake Elsinore
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	53418180	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-09-22-32

DIME Test ID: 2023-09-22-32-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-11-16

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 09/27/2023

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	983.3 grams
Mass of the pycnometer with water (B)	674.6 grams
Mass of the oven dried sample (before pycnometer) (A)	493.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	493.6 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.580
Bulk specific gravity (SSD Basis)	2.614
Apparent specific gravity	2.670
Absorption	1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 11/16/2023 ✔