Summary for Test 2023-06-15-25-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 993778 DEA: 042W5404 EFIS: 0421000234 |
|---|---|
| DIST-CO-RTE-PM | 04-MRN-101-4.0/4.6 |
| Award Date | 06/21/2022 |
| Closeout Date | 02/16/2024 |
| Work Description | PLACE POLYESTER CONCRETE OVERLAY. |
| Location Description | MARIN COUNTY NEAR SAUSALITO FROM 0.7 MILE NORTH OF WALDO UNDERCROSSING TO 0.2 MILE SOUTH OF FRONTAGE ROAD |
| QA Service Level | 1 (Verified on 05/19/2022) |
Sample Information
| Sample Taken Date | 06/15/2023 | Sample Unique Key | 25 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/16/2023 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 17076245467 |
| Laboratory sample identification | 943806 | Linked DIME Sample ID | 943806 |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1476239 |
|---|---|---|---|
| Batch number | 1476239 | Mix number | 1476239 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-06-15-25
DIME Test ID: 2023-06-15-25-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2023-10-18
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 06/20/2023
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.485 in
Sample 1 Thickness: 0.257 in
Sample 1 Area: 0.1246 in^2
Sample 1 Ultimate Strength Actual: 389 lbs
Sample 1 percent elongation: 54.5 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.486 in
Sample 2 Thickness: 0.257 in
Sample 2 Area: 0.1249 in^2
Sample 2 Ultimate Strength Actual: 395 lbs
Sample 2 percent elongation: 55.1 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.487 in
Sample 3 Thickness: 0.248 in
Sample 3 Area: 0.1208 in^2
Sample 3 Ultimate Strength Actual: 384 lbs
Sample 3 percent elongation: 62 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.487 in
Sample 4 Thickness: 0.255 in
Sample 4 Area: 0.1242 in^2
Sample 4 Ultimate Strength Actual: 396 lbs
Sample 4 percent elongation: 62.6 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.486 in
Sample 5 Thickness: 0.255 in
Sample 5 Area: 0.1239 in^2
Sample 5 Ultimate Strength Actual: 391 lbs
Sample 5 percent elongation: 54.8 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.487 in
Sample 6 Thickness: 0.256 in
Sample 6 Area: 0.1247 in^2
Sample 6 Ultimate Strength Actual: 400 lbs
Sample 6 percent elongation: 63.1 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3122 psi
Sample 2 Ultimate strength : 3162.5 psi
Sample 3 Ultimate strength: 3178.8 psi
Sample 4 Ultimate strength: 3188.4 psi
Sample 5 Ultimate strength: 3155.8 psi
Sample 6 Ultimate strength : 3207.7 psi
Ultimate Strength Average: 3169 psi
Percent Elongation Average: 59 %
General comments (publicly viewable) (Max 1000 characters): Accepted Vendor's Results
Test was verified on 10/18/2023 ✔