Summary for Test 2023-09-14-74-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 212246 DEA: 053307A4 EFIS: 0514000027 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-46-49.7/54.6 |
| Award Date | 02/16/2022 |
| Closeout Date | 09/02/2025 |
| Work Description | Cholame Segment |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 09/30/2019) |
Sample Information
| Sample Taken Date | 09/14/2023 | Sample Unique Key | 74 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/06/2023 | Sample type | Per Request |
| A brief description of the sample | 3/4 Class 2 Base Recycled | The quantity of what the sample constitutes | 1 bag |
| From where was the sample collected | Source | First name of sampler or witnessed by | Carlos |
| Last name of sampler or witnessed by | SPM QC | Title of sampler | Wit K Engen CT TET |
| Telephone number of sampler | Laboratory sample identification | 23-AB-0177 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Hanson-Santa Margarita, CA (Martin Marietta) | |
| Transportation Laboratory (TL) Number | C992367 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | NA |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 class 2 base recycled | The fabricator/manufacturer designation for the sample | wt station at 230PM |
| The plant number | A detailed description of where the material sample was collected | prepresenting 541 tons | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-09-14-74
DIME Test ID: 2023-09-14-74-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-10-12
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Bang Nguyen/Aristeo Flores
Date of test: 10/12/2023
| Sieve Size | Individual Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 5061.7 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 196.8 grams | 96 % | |||||
| 650.3 grams | 83 % | |||||
| 453.2 grams | 74 % | |||||
| 1072.8 grams | 53 % | |||||
| 498.3 grams | ||||||
| 125.4 grams | 40 % | |||||
| 92.2 grams | 30 % | |||||
| 84.5 grams | 21 % | |||||
| 78.8 grams | 12 % | |||||
| 51.1 grams | 7 % | |||||
| 21.8 grams | 5 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/12/2023 ✔
