DIME - Test Summary

Summary for Test 2023-08-30-18-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 994633 DEA: 120T6604 EFIS: 1222000076
DIST-CO-RTE-PM	12-ORA-74-0.0/5.3
Award Date	03/22/2023
Closeout Date	07/01/2024
Work Description	Cold plane AC pavement and place RHMA
Location Description	Orange County in and near San Juan Capistrano from Route 5/74 Separation to Gibby Road.
QA Service Level	1 (Verified on 07/07/2023)

Sample Taken Date	08/30/2023	Sample Unique Key	18
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/31/2023
Sample type	Verification	A brief description of the sample	JMF 3/4" RHMA-G-SP 0.5% LAS
The quantity of what the sample constitutes	6 Bags Of Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Hector	Last name of sampler or witnessed by	Reyes
Title of sampler		Telephone number of sampler
Laboratory sample identification	0449G-23	Linked DIME Sample ID
The fabricator/manufacturer/facility name	MM-Lake Elsinore	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0098
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at MM-Lake Elsinore
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	5348180	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-08-30-18

DIME Test ID: 2023-08-30-18-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-10-26

Input Type: Measured

Tester's full name: Satish Jain

Date of test: 09/02/2023

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 984.3 grams

Mass of the pycnometer with water (B): 674.6 grams

Mass of the oven dried sample (before pycnometer) (A): 492.9 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 492.9 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.590

Bulk specific gravity (SSD Basis): 2.627

Apparent specific gravity: 2.691

Absorption: 1.4 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/26/2023 ✔