Summary for Test 2017-02-03-2-3
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 211619 DEA: 101G6404 EFIS: 1017000012 |
|---|---|
| DIST-CO-RTE-PM | 10-SJ-26-11.0, 1.10 |
| Award Date | Not set |
| Closeout Date | 03/22/2023 |
| Work Description | repair bridge after truck hit |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 10/20/2016) |
Sample Information
| Sample Taken Date | 02/03/2017 | Sample Unique Key | 2 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 02/03/2017 | Sample type | Quality Assurance |
| A brief description of the sample | Bar Lock Coupler | The quantity of what the sample constitutes | 4 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Chau |
| Last name of sampler or witnessed by | Hu | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Camblin Steel |
| Transportation Laboratory (TL) Number | C749403 | Inspector Lot Number from the Transportation Laboratory (TL) Form | NA |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Authorization Testing |
|---|---|---|---|
| Service or Ultimate | Service | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | Gerdau CMC |
| Coupler Manufacturer | Dayton Superior | Intermediate Assembler or Fabricator | Unknown |
| Rebar Size | 6 | Coupler Model | Bar Lock |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Unknown | Rebar Hoop Fabricator | Unknown |
| Coupler Component Heat/Lot Number(s) | 73101028 | Rebar Heat Number(s) | 65025990 4062826 |
| Rebar Size 2 | Not set | Coupler Unique ID | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-02-03-2
DIME Test ID: 2017-02-03-2-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile Slip)
Test Release Date: 2017-02-15
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Brian
Date of test: 02/08/2017
UTM: 400KIP
Halo ID: Small
Temperature: 72 F
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Slip (inch) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | #6/19mm | 0.44 | 0 | 43516 | 98900 | Service Splice | Brian |
General comments (publicly viewable) (Max 1000 characters): Service Splice
Test Graph
Source: Partner Data Point FileTest graph for the Sample
Test was verified on 2/8/2017 ✔