Summary for Test 2023-06-07-82-6
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 993669 DEA: 112N1164 EFIS: 1121000145 |
---|---|
DIST-CO-RTE-PM | 11-IMP-186-0.0/2.1 |
Award Date | 06/09/2022 |
Closeout Date | 12/01/2023 |
Work Description | COLD PLANE, SAMI, RHMA-G AND PAVEMENT MARKINGS |
Location Description | IMPERIAL COUNTY AT ANDRADE FROM MEXICO BORDER TO ROUTE 186/8 SEPARATION |
QA Service Level | 1 (Verified on 03/29/2022) |
Sample Information
Sample Taken Date | 06/07/2023 | Sample Unique Key | 82 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/09/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-G |
The quantity of what the sample constitutes | 16 boxes 12 bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Enrique | Last name of sampler or witnessed by | Martinez |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 7404-PSU | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | API Gateway | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | 2 |
Sublot number | 1 | HMA Mix Number | 41 |
Test Details
DIME Sample ID: 2023-06-07-82
DIME Test ID: 2023-06-07-82-6
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2023-08-07
Test Results
Specified number of passes at 12.7 mm: 25000
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 06/28/2023
Test Temperature: 131 F
HMA Production: Field Plant Produced
Compaction Method: SGC Cylindrical Specimen
Type and Amount of Anti-Stripping Additive: 0.8%
Stripping Inflection Point (Wheel A): >25000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 0.28 mm
Maximum impression at 5000 passes (right wheel): 0.37 mm
Average impression at 5000 passes (left/right avg): 0.33 mm
Maximum impression at 10000 passes (left wheel): 0.42 mm
Maximum impression at 10000 passes (right wheel): 0.55 mm
Average impression at 10000 passes (left/right avg): 0.49 mm
Maximum impression at 15000 passes (left wheel): 0.55 mm
Maximum impression at 15000 passes (right wheel): 0.7 mm
Average impression at 15000 passes (left/right avg): 0.63 mm
Maximum impression at 20000 passes (left wheel): 0.65 mm
Maximum impression at 20000 passes (right wheel): 0.88 mm
Average impression at 20000 passes (left/right avg): 0.77 mm
Maximum impression at 25000 passes (left wheel): 0.81 mm
Maximum impression at 25000 passes (right wheel): 1.02 mm
Average impression at 25000 passes (left/right avg): 0.92 mm
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/7/2023 ✔