Summary for Test 2023-06-15-40-2
Test performed: AASHTO T209-22Project Information
| Project Identifiers | Project ID: 215666 DEA: 11430564 EFIS: 1119000015 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-67-R6.0/24.4 |
| Award Date | 03/01/2022 |
| Closeout Date | 11/04/2024 |
| Work Description | COLD PLANE, RHMA OVERLAY AND HFST, AND INSTALL CHANNELIZERS. |
| Location Description | SAN DIEGO COUNTY NEAR LAKESIDE AND RAMONA FROM 0.2 MILE NORTH OF SAN DIEGO RIVER BRIDGE TO ROUTE 78 |
| QA Service Level | 1 (Verified on 07/06/2021) |
Sample Information
| Sample Taken Date | 06/15/2023 | Sample Unique Key | 40 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/19/2023 | Sample type | Quality Assurance |
| A brief description of the sample | 1/2" RHMA-G | The quantity of what the sample constitutes | 12 boxes 2 bags |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Jesse |
| Last name of sampler or witnessed by | Fuentes | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Martin Marietta | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | 21218080SR | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
DIME Sample ID: 2023-06-15-40
DIME Test ID: 2023-06-15-40-2
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2023-07-18
Test Results
Number of Samples: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 06/28/2023
Method Performed: no data
Mass of container filled with water 1: 7477.1 grams
Mass of oven-dry sample in air for Sample 1: 1552.1 grams
Mass of container filled with the sample and water for Sample 1: 8394.1 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.444
Theoretical maximum density at 25°C (77°F): 152.1 lb/ft^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/18/2023 ✔
