Summary for Test 2023-06-14-46-2
Test performed: AASHTO T335-09r13Project Information
Project Identifiers | Project ID: 215666 DEA: 11430564 EFIS: 1119000015 |
---|---|
DIST-CO-RTE-PM | 11-SD-67-R6.0/24.4 |
Award Date | 03/01/2022 |
Closeout Date | Not set |
Work Description | COLD PLANE, RHMA OVERLAY AND HFST, AND INSTALL CHANNELIZERS. |
Location Description | SAN DIEGO COUNTY NEAR LAKESIDE AND RAMONA FROM 0.2 MILE NORTH OF SAN DIEGO RIVER BRIDGE TO ROUTE 78 |
QA Service Level | 1 (Verified on 07/06/2021) |
Sample Information
Sample Taken Date | 06/14/2023 | Sample Unique Key | 46 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/15/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" HMA-A |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Lawless |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 7207-JMFR | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta Lakeside | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0036 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-06-14-46
DIME Test ID: 2023-06-14-46-2
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2023-07-11
Test Results
Method: 1 - Combined Fracture Determination
Aggregate Size and Fracture Type: Coarse 2 Faced and Fine 1 Faced
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 06/22/2023
Mass of fractured, coarse, 2 faced particles tested: 1058 g
Mass of questionable, coarse, 2 faced particles tested: 0 g
Mass of unfractured, coarse, 2 faced particles tested: 11.6 g
Mass of fractured, fine, 1 faced particles tested: 37 g
Mass of questionable, fine, 1 faced particles tested: 0 g
Mass of unfractured, fine, 1 faced particles tested: 0 g
Percentage of questionable, coarse, 2 faced particles tested: 0 %
Percentage of questionable, fine, 1 faced particles tested: 0 %
Percentage of fractured, coarse, 2 faced particles tested: 99 %
Percentage of fractured, fine, 1 faced particles tested: 100 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/11/2023 ✔