Summary for Test 2023-05-22-75-1

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 212496
DEA: 024E4504
EFIS: 0200020286
DIST-CO-RTE-PM02-LAS,MOD-139,299-VAR
Award Date07/28/2020
Closeout Date08/14/2023
Work DescriptionPLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS.
Location DescriptionLASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87
QA Service Level1 (Verified on 06/06/2017)

Sample Information

Sample Taken Date05/22/2023 Sample Unique Key75
Date that the sample was received by the laboratory/organization performing the testing06/07/2023 Sample typeDepartment Acceptance
A brief description of the samplePG 58-34M The quantity of what the sample constitutes2 of 2 cans
From where was the sample collectedJob Site First name of sampler or witnessed byC
Last name of sampler or witnessed byBryant Title of sampler
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameHat Creek - Shaw Pit Facility
Transportation Laboratory (TL) NumberC079243 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix Number
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2023-05-22-75
DIME Test ID: 2023-05-22-75-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-06-09

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 06/09/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.146 kPa
Phase Angle (δ) (for the 10 cycles): 68.1 degree
Complex Modulus (G*) (for the 10 measurements): 1.218 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 1.31 kPa
General comments (publicly viewable) (Max 1000 characters): OG

Test was verified on 6/9/2023 ✔